Use the improved 3DORBIT command to view your 3D models. Dragging the cursor horizontally moves the camera parallel to the XY plane; dragging it vertically moves it parallel to the Z axis. The shortcut menu lets you choose from a variety of navigation modes.\n\nNavigation modes are as follows:\n* The new Constrained Orbit mode keeps you from rolling the geometry completely over (3DORBIT).\n* Free Orbit mode returns you to previous behavior and allows orbiting in any direction (3DORBIT).\n* Continuous Orbit allows you to set the objects in continuous motion (3DORBIT).\n* Adjust Distance controls the distance toward or away from the objects (3DDISTANCE).\n* Swivel simulates the effect of swiveling the camera on a tripod (3DSWIVEL).\n* Walk through a model at a fixed height above the XY plane (3DWALK).\n* Fly through the model without any height restrictions (3DFLY).\n* Similar to Adjust Distance, Zoom simulates moving the camera closer or further away (3DZOOM).\n* Pan moves the view in the direction you drag (3DPAN).\n\n[img[]]\n\n//''Tip:'' Press Shift+middle mouse button for quick access to 3DORBIT.//\n
* [[Solid Primitives]]\n* [[Swept Solids and Surfaces]]\n* [[Creating Surfaces and Solids]]
Plenty of new 3D tools are available to make your experience in 3D effortless.\n\n* [[Dashboard]]\n* [[OPTIONS 3D Modeling Tab]]\n* [[Dynamic Geometric Feedback]]\n
* [[3D Orbiting and Viewing]]\n* [[Perspective]]\n* [[Walk Throughs]]\n* [[Creating Cameras]]\n* [[Visual Styles]]
!GTD and TW 2.0\nThis is TiddlyWiki <<version>> using StyleSheet and PageTemplate tiddlers for the GTD Theme.\n\nGTD Tiddly Wiki is a GettingThingsDone adaptation by NathanBowers of JeremyRuston's Open Source TiddlyWiki. The purpose of GTD Tiddly Wiki is to give users a single repository for their GTD lists and support materials so they can create/edit lists, and then print directly to 3x5 cards for use with the HipsterPDA.\n\n!Features Include:\n* Free and Open Source.\n* Easy to update.\n* Prints directly to 3x5.\n* Searchable.\n* Exists as a single, portable, cross platform file.\n* It runs on your computer, so you can make changes when you're not online. It's not a ServerSide thing.\n!Get started:\nStart by saving GTDTiddlyWiki to your computer (right click on [[this link|#]] and select 'Save link as...' or 'Save target as...' See SaveChanges for details).\n \nYou can edit entries, or "Tidders", by clicking "edit" or double clicking anywhere on the Tiddler. When you click "done" or press [ctrl+enter] your changes are saved.\n\nThere are some pre-populated action lists in the MainMenu on the left. If you want to start with a blank slate, here is an [[empty template|]].\n\n!!More information:\n*SupportedBrowsers\n*KeyFeatures\n*KeyboardShortcuts\n*[[Print3x5]]\n*FormattingInstructions (create lists, headings, and other formatting)\n*AboutTiddlers\n*CreateTiddlers\n*DeleteTiddlers\n* PermaView\n*KnownBugs\n* HowToUpgrade\n* ServerSide version.\n*Jeremy's original HelloThere.\n\nThanks to JeremyRuston for creating such a great Open Source project!\n----\nTiddlyWiki and GTD Tiddly Wiki are published under an OpenSourceLicense and carry NoWarranty.\n\nCurrent Version: <<version>> | RevisionHistory | UpdateNotification
This is the TiddlyWiki version of the book "Tips & Tricks for Using AutoCAD 2007 Software" by LynnAllen. The conversion was done by TranTuanAnh. \n\nThe purpose of this experiment is to try out new ways to provide post-sale documentation to users. Few advantages of using TiddlyWiki are following:\n\n* It is more interactive, TiddlyWiki offers an extremely interesting way to browse the content with the concepts of WikiWord, tags, etc.\n* It helps to democratize the publication process. It is Read/Write documents my friends :) Users can participate, they can make changes; we empower them. \n* The kind of content like "Tips and Tricks" is MicroContent and should be written in a new WritingStyle.\n* It is technically and practically convenient, this is just one HTML file. Anyone can ready it, everyone can publish it.\n\nI leave you to figure out how ThisSiteStructure is mapped from the original document.\n\nThis is edit mode.
"Tiddlers" are the building blocks of TiddlyWiki. Each "entry" or "post" is a Tiddler. There are also SpecialTiddlers that control the MainMenu, SiteTitle, SiteSubtitle, and list of DefaultTiddlers that display on start up.
AutoCAD 2007 lets you open DWG™ files all the way back to AutoCAD version 2.0. And free DWG format conversion and viewer tools let you access files and exchange data regardless of file version.\n\n* Backward and forward conversion of DWG files from AutoCAD Release 14 to AutoCAD 2007 using DWG TrueConvert™ software.\n* Share AutoCAD drawings easily and accurately with DWG TrueView™ technology. You can view, plot, and publish designs to the DWG format as well as publish files in the DWF format for quick and easy review and markup.\n\nYou can download DWG TrueConvert and DWG TrueView for free* (and we all love free!) at\n\n * This product is subject to the terms and conditions of the end-user license agreement that accompanies download of this software.
Actions drive the geometry in specific ways. For example use Stretch to change the length of a bolt.\n\n//''Note:'' An exclamation point displays to indicate parameters with no assigned action.//\n\nFinish by closing the block editor and trying out your new dynamic block!
<<option chkGenerateAnRssFeed>> GenerateAnRssFeed\n<<option chkOpenInNewWindow>> OpenLinksInNewWindow\n<<option chkSaveEmptyTemplate>> SaveEmptyTemplate\n<<option chkToggleLinks>> Clicking on links to tiddlers that are already open causes them to close\n^^(override with Control or other modifier key)^^\n<<option chkHttpReadOnly>> HideEditingFeatures when viewed over HTTP\n<<option chkForceMinorUpdate>> Treat edits as MinorChanges by preserving date and time\n^^(override with Shift key when clicking 'done' or by pressing Ctrl-Shift-Enter^^\n<<option chkConfirmDelete>> ConfirmBeforeDeleting\nMaximum number of lines in a tiddler edit box: <<option txtMaxEditRows>>\nFolder name for backup files: <<option txtBackupFolder>>\n\n<<tiddler UploadOptions>>
config.options.chkHttpReadOnly = false;
!!Control the Hatch Origin\nSet a new origin by picking a point, or select one of four corners of the boundary extents. You can also choose to center it.\n\n[img[]]\n\n!!Create Separate Hatches\nToggle tells AutoCAD to treat each hatched area separately (for easy editing later).\n\n!!Specifying Hatch Boundaries\nHatch a boundary even if the entire boundary isn’t visible. Add or remove boundaries to existing hatching.\n\n//''Note:'' If you’ve ever worked on a drawing where the boundary is missing (and you need it back), you know how frustrating it can be. You can now recreate hatch boundaries in the\nHATCHEDIT command!//\n\n!!Find the Hatch Area\nThe Properties palette displays the cumulative area of one or more selected hatch objects. It’s easy to add an updatable field of the area.\n\n[img[]]\n\n
It’s easy to attach a material to an object or face by dragging the material from the various Materials tool palettes or the Materials window onto the object. You can also apply materials per layer. Once you attach a material, it is added to the drawing and displayed as a swatch in the Materials window.\n\n//''Tip:'' You might find it easier to attach materials in parallel mode than in perspective mode.//\n\n[img[]]\n\nAutoCAD® 2007 includes more than 300 materials and textures.\n\n//''Tip:'' Use Ctrl to drag a material to a face rather than the entire object.//
AutoCAD is a suite of CAD software products for 2- and 3-dimensional design and drafting, developed and sold by Autodesk, Inc.
//{{{\nconfig.options.txtBackupFolder = "twBackups";\n//}}}
JeremyRuston said:\n<<<\nA TiddlyWiki is like a blog because it's divided up into neat little chunks, but it encourages you to read it by hyperlinking rather than sequentially: if you like, a non-linear blog analogue that binds the individual microcontent items into a cohesive whole. I think that TiddlyWiki represents a novel medium for writing, and will promote it's own distinctive WritingStyle. This is the first version of TiddlyWiki and so, as discussed in TiddlyWikiDev, it's bound to be FullOfBugs, have many MissingFeatures and fail to meet all of the DesignGoals. And of course there's NoWarranty, and it might be judged a StupidName.\n<<<\n\n>level 1\n>level 1\n>>level 2\n>>level 2\n>>>level 3\n>>>level 3\n>>level 2\n>level 1\n
This ThirdVersion of TiddlyWiki fixes a problem with line breaks within tiddlers under InternetExplorer. It also tries to avoid closing tiddlers while they are being edited. There's a bunch of smaller BugFixes as well, but they are somewhat balanced by the KnownBugs.
Edit this tiddler to see how to create BulletPoints\n* Like this one\n* And this one\n** And this second-level one\n* And a final one
/***\n''Name:'' Calendar plugin\n''Version:'' 0.5\n''Author:'' SteveRumsby\n\n''Syntax:'' \n{{{<<calendar>>}}} or {{{<<calendar year>>}}} or {{{<<calendar year month>>}}} or {{{<<calendar thismonth>>}}}\n\n''Description:'' \nThe first form produces an full-year calendar for the current year. The second produces a full-year calendar for the given year. The third produces a single month calendar for the given month and year. The fourth form produces a single month calendar for the current month.\nWeekends and holidays are highlighted (see below for how to specify holidays).\n\n''Configuration:''\nModify this section to change the text displayed for the month and day names, to a different language for example. You can also change the format of the tiddler names linked to from each date, and the colours used.\n\n''Changes by ELS 2005.10.30:''\nconfig.macros.calendar.handler()\n^^use "tbody" element for IE compatibility^^\n^^IE returns 2005 for current year, FF returns 105... fix year adjustment accordingly^^\ncreateCalendarDays()\n^^use showDate() function (if defined) to render autostyled date with linked popup^^\ncalendar stylesheet definition\n^^use .calendar class-specific selectors, add text centering and margin settings^^\n***/\n//{{{\nconfig.macros.calendar = {};\n\nconfig.macros.calendar.monthnames = ["Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"];\nconfig.macros.calendar.daynames = ["M", "T", "W", "T", "F", "S", "S"];\nconfig.macros.calendar.firstday = 6; \nconfig.macros.calendar.firstweekend = 5;\n\nconfig.macros.calendar.weekendbg = "#eeeebb";\nconfig.macros.calendar.monthbg = "#770000";\nconfig.macros.calendar.holidaybg = "#ffc0c0";\n//}}}\n/***\n!Code section:\n***/\n// (you should not need to alter anything below here)//\n//{{{\nconfig.macros.calendar.tiddlerformat = "0DD/0MM/YYYY"; // This used to be changeable - for now, it isn't// <<smiley :-(>> \n\nversion.extensions.calendar = { major: 0, minor: 5, revision: 0, date: new Date(2006, 0, 11)};\nconfig.macros.calendar.monthdays = [ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31];\n\nconfig.macros.calendar.holidays = [ ]; // Not sure this is required anymore - use reminders instead\n//}}}\n\n// //Is the given date a holiday?\n//{{{\nfunction calendarIsHoliday(date)\n{\n var longHoliday = date.formatString("0DD/0MM/YYYY");\n var shortHoliday = date.formatString("0DD/0MM");\n\n for(var i = 0; i < config.macros.calendar.holidays.length; i++) {\n if(config.macros.calendar.holidays[i] == longHoliday || config.macros.calendar.holidays[i] == shortHoliday) {\n return true;\n }\n }\n return false;\n}\n//}}}\n\n// //The main entry point - the macro handler.\n// //Decide what sort of calendar we are creating (month or year, and which month or year)\n// // Create the main calendar container and pass that to sub-ordinate functions to create the structure.\n// ELS 2005.10.30: added creation and use of "tbody" for IE compatibility and fixup for year >1900//\n// ELS 2005.10.30: fix year calculation for IE's getYear() function (which returns '2005' instead of '105')//\n//{{{\nconfig.macros.calendar.handler = function(place,macroName,params)\n{\n var calendar = createTiddlyElement(place, "table", null, "calendar", null);\n var tbody = createTiddlyElement(calendar, "tbody", null, null, null);\n var today = new Date();\n var year = today.getYear();\n if (year<1900) year+=1900;\n if (params[0] == "thismonth")\n createCalendarOneMonth(tbody, year, today.getMonth());\n else if (params[0] == "lastmonth") {\n var month = today.getMonth()-1; if (month==-1) { month=11; year--; }\n createCalendarOneMonth(tbody, year, month);\n }\n else if (params[0] == "nextmonth") {\n var month = today.getMonth()+1; if (month>11) { month=0; year++; }\n createCalendarOneMonth(tbody, year, month);\n }\n else {\n if (params[0]) year = params[0];\n if(params[1])\n createCalendarOneMonth(tbody, year, params[1]-1);\n else\n createCalendarYear(tbody, year);\n }\n}\n//}}}\n\n//{{{\nfunction createCalendarOneMonth(calendar, year, mon)\n{\n var row = createTiddlyElement(calendar, "tr", null, "calenderMonthTitle", null);\n createCalendarMonthHeader(calendar, row, config.macros.calendar.monthnames[mon] + " " + year, true, year, mon);\n row = createTiddlyElement(calendar, "tr", null, "calendarDaysOfWeek", null);\n createCalendarDayHeader(row, 1);\n createCalendarDayRowsSingle(calendar, year, mon);\n}\n//}}}\n\n//{{{\nfunction createCalendarMonth(calendar, year, mon)\n{\n var row = createTiddlyElement(calendar, "tr", null, null, null);\n createCalendarMonthHeader(calendar, row, config.macros.calendar.monthnames[mon] + " " + year, false, year, mon);\n row = createTiddlyElement(calendar, "tr", null, null, null);\n createCalendarDayHeader(row, 1);\n createCalendarDayRowsSingle(calendar, year, mon);\n}\n//}}}\n\n//{{{\nfunction createCalendarYear(calendar, year)\n{\n var row;\n row = createTiddlyElement(calendar, "tr", null, null, null);\n var back = createTiddlyElement(row, "td", null, null, null);\n var backHandler = function() {\n removeChildren(calendar);\n createCalendarYear(calendar, year-1);\n };\n createTiddlyButton(back, "<", "Back", backHandler);\n back.align = "center";\n\n var yearHeader = createTiddlyElement(row, "td", null, "calendarYear", year);\n yearHeader.align = "center";\n yearHeader.setAttribute("colSpan", 19);\n\n var fwd = createTiddlyElement(row, "td", null, null, null);\n var fwdHandler = function() {\n removeChildren(calendar);\n createCalendarYear(calendar, year+1);\n };\n createTiddlyButton(fwd, ">", "Fwd", fwdHandler);\n fwd.align = "center";\n\n createCalendarMonthRow(calendar, year, 0);\n createCalendarMonthRow(calendar, year, 3);\n createCalendarMonthRow(calendar, year, 6);\n createCalendarMonthRow(calendar, year, 9);\n}\n//}}}\n\n//{{{\nfunction createCalendarMonthRow(cal, year, mon)\n{\n var row = createTiddlyElement(cal, "tr", null, null, null);\n createCalendarMonthHeader(cal, row, config.macros.calendar.monthnames[mon], false, year, mon);\n createCalendarMonthHeader(cal, row, config.macros.calendar.monthnames[mon+1], false, year, mon);\n createCalendarMonthHeader(cal, row, config.macros.calendar.monthnames[mon+2], false, year, mon);\n row = createTiddlyElement(cal, "tr", null, null, null);\n createCalendarDayHeader(row, 3);\n createCalendarDayRows(cal, year, mon);\n}\n//}}}\n\n//{{{\nfunction createCalendarMonthHeader(cal, row, name, nav, year, mon)\n{\n var month;\n if(nav) {\n var back = createTiddlyElement(row, "td", null, null, null);\n var backHandler = function() {\n var newyear = year;\n var newmon = mon-1;\n if(newmon == -1) { newmon = 11; newyear = newyear-1;}\n removeChildren(cal);\n createCalendarOneMonth(cal, newyear, newmon);\n };\n createTiddlyButton(back, "<", "Back", backHandler);\n back.align = "center";\n = config.macros.calendar.monthbg; \n month = createTiddlyElement(row, "td", null, "calendarMonthname", name)\n month.setAttribute("colSpan", 5);\n var fwd = createTiddlyElement(row, "td", null, null, null);\n var fwdHandler = function() {\n var newyear = year;\n var newmon = mon+1;\n if(newmon == 12) { newmon = 0; newyear = newyear+1;}\n removeChildren(cal);\n createCalendarOneMonth(cal, newyear, newmon);\n };\n createTiddlyButton(fwd, ">", "Fwd", fwdHandler);\n fwd.align = "center";\n = config.macros.calendar.monthbg; \n } else {\n month = createTiddlyElement(row, "td", null, "calendarMonthname", name)\n month.setAttribute("colSpan", 7);\n }\n month.align = "center";\n = config.macros.calendar.monthbg;\n}\n//}}}\n\n//{{{\nfunction createCalendarDayHeader(row, num)\n{\n var cell;\n for(var i = 0; i < num; i++) {\n for(var j = 0; j < 7; j++) {\n var d = j + config.macros.calendar.firstday;\n if(d > 6) d = d - 7;\n cell = createTiddlyElement(row, "td", null, null, config.macros.calendar.daynames[d]);\n\n if(d == config.macros.calendar.firstweekend || d == config.macros.calendar.firstweekend+1)\n cell.className = "calendarWeekend";\n }\n }\n}\n//}}}\n\n//{{{\nfunction createCalendarDays(row, col, first, max, year, mon)\n{\n var i;\n for(i = 0; i < col; i++) {\n createTiddlyElement(row, "td", null, null, null);\n }\n var day = first;\n for(i = col; i < 7; i++) {\n var d = i + config.macros.calendar.firstday;\n if(d > 6) d = d - 7;\n var daycell = createTiddlyElement(row, "td", null, null, null);\n var isaWeekend = ((d == config.macros.calendar.firstweekend || d == (config.macros.calendar.firstweekend+1))? true:false);\n\n if(day > 0 && day <= max) {\n var celldate = new Date(year, mon, day);\n // ELS 2005.10.30: use <<date>> macro's showDate() function to create popup\n if (window.showDate) {\n showDate(daycell,celldate,"popup","DD","DD-MMM-YYYY",true, isaWeekend); \n } else {\n if(isaWeekend) = config.macros.calendar.weekendbg;\n var title = celldate.formatString(config.macros.calendar.tiddlerformat);\n if(calendarIsHoliday(celldate)) {\n = config.macros.calendar.holidaybg;\n }\n if(window.findTiddlersWithReminders == null) {\n var link = createTiddlyLink(daycell, title, false);\n link.appendChild(document.createTextNode(day));\n } else {\n var button = createTiddlyButton(daycell, day, title, onClickCalendarDate);\n }\n }\n }\n day++;\n }\n}\n//}}}\n\n// //We've clicked on a day in a calendar - create a suitable pop-up of options.\n// //The pop-up should contain:\n// // * a link to create a new entry for that date\n// // * a link to create a new reminder for that date\n// // * an <hr>\n// // * the list of reminders for that date\n//{{{\nfunction onClickCalendarDate(e)\n{\n var button = this;\n var date = button.getAttribute("title");\n var dat = new Date(date.substr(6,4), date.substr(3,2)-1, date.substr(0, 2));\n\n date = dat.formatString(config.macros.calendar.tiddlerformat);\n var popup = createTiddlerPopup(this);\n popup.appendChild(document.createTextNode(date));\n var newReminder = function() {\n var t = store.getTiddlers(date);\n displayTiddler(null, date, 2, null, null, false, false);\n if(t) {\n document.getElementById("editorBody" + date).value += "\sn<<reminder day:" + dat.getDate() +\n " month:" + (dat.getMonth()+1) +\n " year:" + (dat.getYear()+1900) + " title: >>";\n } else {\n document.getElementById("editorBody" + date).value = "<<reminder day:" + dat.getDate() +\n " month:" + (dat.getMonth()+1) +\n " year:" + (dat.getYear()+1900) + " title: >>";\n }\n };\n var link = createTiddlyButton(popup, "New reminder", null, newReminder); \n popup.appendChild(document.createElement("hr"));\n\n var t = findTiddlersWithReminders(dat, 0, null, null);\n for(var i = 0; i < t.length; i++) {\n link = createTiddlyLink(popup, t[i].tiddler, false);\n link.appendChild(document.createTextNode(t[i].tiddler));\n }\n}\n//}}}\n\n//{{{\nfunction calendarMaxDays(year, mon)\n{\n var max = config.macros.calendar.monthdays[mon];\n if(mon == 1 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {\n max++;\n }\n return max;\n}\n//}}}\n\n//{{{\nfunction createCalendarDayRows(cal, year, mon)\n{\n var row = createTiddlyElement(cal, "tr", null, null, null);\n\n var first1 = (new Date(year, mon, 1)).getDay() -1 - config.macros.calendar.firstday;\n if(first1 < 0) first1 = first1 + 7;\n var day1 = -first1 + 1;\n var first2 = (new Date(year, mon+1, 1)).getDay() -1 - config.macros.calendar.firstday;\n if(first2 < 0) first2 = first2 + 7;\n var day2 = -first2 + 1;\n var first3 = (new Date(year, mon+2, 1)).getDay() -1 - config.macros.calendar.firstday;\n if(first3 < 0) first3 = first3 + 7;\n var day3 = -first3 + 1;\n\n var max1 = calendarMaxDays(year, mon);\n var max2 = calendarMaxDays(year, mon+1);\n var max3 = calendarMaxDays(year, mon+2);\n\n while(day1 <= max1 || day2 <= max2 || day3 <= max3) {\n row = createTiddlyElement(cal, "tr", null, null, null);\n createCalendarDays(row, 0, day1, max1, year, mon); day1 += 7;\n createCalendarDays(row, 0, day2, max2, year, mon+1); day2 += 7;\n createCalendarDays(row, 0, day3, max3, year, mon+2); day3 += 7;\n }\n}\n//}}}\n\n//{{{\nfunction createCalendarDayRowsSingle(cal, year, mon)\n{\n var row = createTiddlyElement(cal, "tr", null, null, null);\n\n var first1 = (new Date(year, mon, 1)).getDay() -1 - config.macros.calendar.firstday;\n if(first1 < 0) first1 = first1+ 7;\n var day1 = -first1 + 1;\n var max1 = calendarMaxDays(year, mon);\n\n while(day1 <= max1) {\n row = createTiddlyElement(cal, "tr", null, null, null);\n createCalendarDays(row, 0, day1, max1, year, mon); day1 += 7;\n }\n}\n//}}}\n\n// //ELS 2005.10.30: added styles\n//{{{\nsetStylesheet(".calendar, .calendar table, .calendar th, .calendar tr, .calendar td { font-size:10pt; text-align:center; } .calendar { margin:0px !important; }", "calendarStyles");\n//}}}\n
Use the new Clean Screen button located in the lower-right corner of the screen to turn off everything except for the status bar, menu bar, and command window.\n\n[img[]]
If you have all your toolbars and palettes right where you want them—lock them up! Right-click the lock symbol at the end of\nthe status bar and select what you want to lock from the shortcut menu. Use the Ctrl key to temporarily override locking.\n\nYou can also choose to attach your palettes to an anchor tab based on the left or right side of the drawing area. Palettes roll open or closed as the cursor moves over them, keeping them out of the way but available for quick access. You can easily stack several on each side of the screen for maximum productivity. Simply right-click the name bar and choose Anchor Left or Anchor Right from the shortcut menu.\n\n[img[]]
! Preferred Method\n# Create new Tiddlers directly in the MainMenu by typing them in the MainMenu Tiddler.\n\n! Method 2\n# Click CreateNewTiddler in the MainMenu.\n# Edit the title and content to create.\n\n! Method 3\n# Enter a mixed-case WikiWord (or double square brackets for NonWikiWordLinks) into an existing Tiddler.\n# Click on the new italicized "empty" Tiddler to edit.\n# When you are done editing, the Tiddler is created.
!!Section\nUse the new sectioning functionality to cut away geometry and create 2D drawings (in the form of a block) from your 3D geometry. The new SECTIONPLANE command easily creates the section. The shortcut menu makes it easy to position it correctly with live sectioning. If you need a section line that has jogged segments, the Draw Section option lets you pick multiple points throughout the 3D model.\n\nRight-click any section line to access the Section Settings dialog box. Here you’ll find all the settings for your section views.\n\n[img[]]\n\n//''Tip:'' If you update your model, you can also update the section view block by selecting Replace Existing Block in the Generate Section/Elevation dialog box—think of all the time you’ll save!\n\n//''Tip:'' Select a section plane and use the grip to switch between section plane, section volume, and section boundary.\n\n[img[]]\n\n!!Flatten\nUse the new FLATSHOT command to create 2D line drawings from your 3D geometry. The result is in the form of a block—all hidden lines are captured.
Use the CAMERA command to set up cameras for viewing your design. A camera icon is added to the drawing with a corresponding named view.\n\n* Location: The point from which you are viewing the model.\n* Target: The point that you are viewing (center of the view).\n* Lens Length: Magnification properties of the camera’s lens. The greater the lens length, the narrower the field of view.\n* Front and Back Clipping Planes: Specifies the boundaries that define or clip a view. Everything between the camera and the front clipping plane is hidden. Everything between the back clipping plane and the target is hidden.\n\n[img[]]\n\n//''Tip:'' Use the drop-down menu in the Navigation control panel of the dashboard to quickly restore a camera’s view.//
Now you can drag from the command list onto tool palettes.\n\n//''Tip:'' Tired of pressing the F1 key by mistake? Change F1 from Help to Escape by setting up a keyboard shortcut in the CUI. Simply drag Cancel from the command list to the shortcut keys listing. Highlight Cancel and assign it to F1!//\n\n[img[]]
!!Creating Surfaces\nConvert objects into surfaces with the CONVTOSURFACE command.\n\nCreate surfaces from 3D solids with curved faces with the EXPLODE command.\n\nUse XEDGES to extract wireframe geometry from solids, surfaces, and regions.\n\nUse PLANESURF to create a planar surface by\n* Selecting one or more objects that form an enclosed area\n* Specifying the opposite corners of a rectangle\n\n!!Creating Solids\nCONVTOSOLID converts the following objects into extruded 3D solids:\n* Uniform-width polylines with thickness\n* Closed zero-width polylines with thickness\n* Circles with thickness\n\nTHICKEN converts surfaces to solids by thickening a surface.\n\nSLICE creates new solids by slicing existing ones. Define the cutting plane by specifying points or by selecting a surface or planar object.\n\n[img[]]\n\n!!Creating Composite Solids\nUnion, Subtract, Intersect, Fillet, and Chamfer create composite solids. Use the Show History option in the Properties palette (or the SHOWHIST command) to display wireframes of the original forms that make up the composite.\n\n!!Editing Solids\nEasily edit existing solids in the Properties palette or by grip editing the solid. Use Ctrl to select the face or edge or to select objects within a composite solid. You can also use the grip tool to move along an axis or plane by hovering over the Move grip of a selected solid.\n\n[img[]]\n\n//''Tip:'' If you are having trouble selecting the correct face or edge, use the spacebar to cycle through all the possibilities!//\n\n[img[]]\n\n!!Checking for Interference\nUse INTERFERE to identify solids that interfere with one another. You can even select blocks and xrefs when searching for interferences and individual nested solids within a block or xref. Where solids intersect, the software creates and highlights temporary solids.\n\n!!Align\nAlign works dynamically with 3D objects so you see the selected geometry align as you specify the destination points.
You can specify your own styles -- that will persist even if you upgrade GTDTW -- in the new special tiddler, StyleSheet.\n\nStyleSheet is pre-populated so you can see how it works. If you want to print to different sizes of paper, or resize the base fonts, or use different fonts, the body style rules are where you'd start. If you are upgrading your version of GTDTW, you'll need to create and populate the StyleSheet for yourself.\n\nStyleSheet suffers from a bug that truncates long entries with many non-alphanumeric characters, so if you try to put the entire set off styles in there, it probably won't work.
Use the SCALELISTEDIT command to add, delete, edit, and rearrange the scale list used in PLOT, PAGESETUP, Viewport toolbar, and so on.\n\n[img[]]
Now you can customize your AutoCAD application with the new, friendly CUI command. The old menu files (MNU, MNS, and MNC) are out—the new XML-based CUI is in!\n\n[img[]]\n\n* [[Migrate Existing Menu Files]]\n* [[Creating Palettes from the CUI]]\n* [[Double-Clicking]]\n* [[Workspaces]]
The new Dashboard palette makes it easy to navigate the new 3D tools. It can be found under Tools>Palettes>Dashboard or by entering the DASHBOARD command. The dashboard consists of seven control\npanels:\n* 2D Draw (hidden by default): Access standard 2D drawing commands\n* 3D Make: Easily access 3D solids and surfaces\n* 3D Navigate: Set up various 3D views and animations\n* Lights: Add lighting to your model\n* Visual Styles: Create and move from one visual style to another\n* Materials: Apply materials and textures to objects\n* Render: Quickly access basic rendering functions\n\nRight-click any of the control panels to hide or display them. It’s also easy to resize, dock, auto-hide, and expand the control panels.\n\n[img[]]
[[About This Document]]\n[[About GTD TiddlyWiki]]\n[[HelloThere]]\n
The new Block Definition Editor (BEDIT) makes it easy to create Dynamic Blocks or edit your existing blocks.\n# Select an existing block.\n# Right-click and choose Block Editor from the shortcut menu.\n\nThe Block Authoring palettes contain the tools to make your blocks dynamic. The process looks like this:\n# Select a parameter and assign it to a portion of your block.\n# Select the action you want to assign to that parameter. Place the action somewhere near the parameter. Most parameters must have at least one action.\n\n//''Tip:'' Try one parameter or action pair at a time to help ensure that you get the proper results.//\n\n[img[]]
Enter Tiddler edit mode and click "delete" \n\nIf you delete a Tiddler that lives in MainMenu or DefaultTiddlers, you'll need to manually remove them from those SpecialTiddlers.\n\nSee also: RenameTiddlers
I found the [[Aardvark Firefox extension|]] indispensable in developing GTDTiddlyWiki. Browser view-source doesn't work on TiddlyWiki, so I use Aardvark to "see" the page structure.
!!Varying Dimension Linetypes\nYou don’t have to explode a dimension to change individual dimension or extension lines to a different linetype! (Great for centerlines.) Make changes in DIMSTYLE or the Properties palette.\n\n!!Dimensioning Arc Lengths\nThe DIMARC command lets you dimension the length of a dimension, complete with an arc length symbol if desired.\n\n[img[]]\n\n!!Jogged Dimensions\nDimensioning extremely large arcs can be a problem when the center point is off the screen. You can specify a jog angle to properly dimension large curves.\n\n[img[]]\n\n!!Flipping Dimension Arrows\nThe right-click shortcut menu offers the option of flipping your dimension arrow(s). Simply select the dimension near the arrow you want to flip and choose Flip Arrow from the shortcut menu.\n\n[img[]]\n\n!!Initial Length Symbol\nAutoCAD software provides a symbol to indicate initial length, available from the Symbol list in the MTEXT shortcut menu.\n\n!!Fixed Length Extension Lines\nYou can create dimensions using extension lines with a consistent length, regardless of how far away from the part you select. As a result, the extension lines might not even touch the geometry.\n\n!!New Arrowheads\nTwo new arrowheads have been added: Origin2 and Small.\n\n[img[]]
Standard and crossing windows are distinguishable by transparent windows of differing colors. You can control the functionality and colors in the Selection tab of the Options dialog box.
When you double-click an object, a command is launched. Now you can assign which command is executed for each type of object! For example, when you doubleclick an attribute definition, the DDEDIT command is executed, allowing you to edit only the attribute value. Maybe you’d prefer the EATTEDIT command, which allows you to edit all the properties in addition to the attribute value. Simply replace DDEDIT in the macro with EATTEDIT or drag Edit Attribute from the command list to the double-click menu.\n\n//''Tip:'' For you Autodesk Inventor users, why not assign 3DORBIT to the F4 key in the CUI? It will make the transition between the two products so much easier!//
Because TiddlyWiki is a single HTML file, you've actually already downloaded the entire software just by viewing this site. If you want to be able to SaveChanges, you can save your own TiddlyWiki to your local drive by right clicking on [[this link|#]] and selecting 'Save link as...' or 'Save target as...'. You can choose where to save the file, and what to call it (but keep the .HTML extension).
The new Dynamic Blocks enable you to create powerful and flexible blocks like never before. Some of the many advantages are as follows:\n* One block, multiple definitions that could drastically reduce the size of your block libraries. For example, one bed block, many options.\n[img[]]\n* Create blocks that automatically align with existing geometry.\n[img[]]\n* Edit individual components of a block. You can even assign specific increments for stretching or rotating with minimum and maximum values.\n[img[]]\n* Create blocks with multiple insertion\n[img[]]\n\n* [[Defining Dynamic Blocks]]\n* [[Parameters]]\n* [[Actions]]
* The size, shape, and location of 3D objects dynamically display as you create them, making it easier to visualize your design. You can enter dimensions manually using Dynamic Input, or you can drag the cursor to visually specify them.\n\n[img[]]\n\n* No more fighting with the UCS command. You can easily draw on a new work plane by passing your cursor over the edge of an existing face until it highlights. This becomes a temporary UCS. DUCS, a new button on the status bar, needs to be on.\n\n* Object tracking now works dynamically in 3D, even in perspective mode!\n\n//''Tip:'' Holding down the Ctrl key as you pass your cursor over a solid lets you pick the various components of the solid for editing (very handy!). Select the blue grip to edit.//\n\n* Select an axis on the grip tool to lock in an X, Y, or Z direction for easy editing.\n\n[img[]]\n\n//''Tip:'' Use the spacebar to cycle from Stretch to Move to Rotate.//\n\n[img[]]
Now you can have your command line conveniently follow your cursor. From the status bar, simply turn Dynamic Input on. Select the Down Arrow key to display any command options (or use the familiar right-click\nshortcut menus).\n\n# Right-click DYN to view the Dynamic Input tab of the Drafting Settings dialog box. Here you can indicate how much (or how little) information you want to display.\n# To display the command line input and prompts from the cursor, make sure Show Command Prompting and Enable Pointer Input are selected.\n\n//''Tip:'' To turn on Dynamic Input you can also press the F12 key.//\n\n[img[]]\n\n//''Tip:'' Press Ctrl+9 to turn the traditional command line on or off.//\n\nCreating existing geometry and grip editing enable you to change the length or angle of existing objects by directly entering the new value on the screen. To do so, be sure Enable Dimension Input Where Possible is selected. Note: Use the Tab key to toggle between the two values.\n\n[img[]]\n\n//''Tip:'' Set the system variable TOOLTIPMERGE to 1 to display both the indicated object snap and the command prompts.//\n\nIf you enter an unacceptable value, the software automatically highlights the value so you can reenter it.\n\n
Try holding down the alt- or shift-key while clicking on a link to a tiddler, on the 'options' button or on the CloseButton for a tiddler. Kind of a respectful homage to Mac OS X, which does something similar for many of its system animations. (On browsers like InternetExplorer that use the shift key to open a new window, it's best to use the alt-key).
You can email the creator of TiddlyWiki at jeremy (at) osmosoft (dot) com.
Questions? Comments? Bugs? Please use the GTD Tiddly Wiki GTDTWForum. It's the best way to get a response and you'll have more eyes on your issue.\n\nTo email me use my [[mail form|]]. I can't always reply to everyone, but I do try to read all emails.\n\nTo contact the original creator of TiddlyWiki, EmailJeremy.
Edit this tiddler to see how to insert images.\n[img[]]
There's now an option under InterfaceOptions to allow TiddlyWiki's animation effects to be turned off.
True in-place editing! The text in the MTEXT dialog box looks identical to the resulting text.\n* Bullets, numbering, and lettering are available and automatically recalculate if something is added or removed from the list.\n* Control paragraph width by sliding the end of the ruler bar.\n* Double-click the end of the ruler bar to resize MTEXT box (such as the\nMicrosoft® Excel® application).\n* Use Shift+Tab to remove one level of nesting from a numbered or bulleted list.\n\n//''Tip:'' Now the MTEXT editor zooms in when text is too small as long as MTEXTFIXED is set to 2.//\n\n//''Tip:'' The new DTEXTED setting of 2 enables you to select anywhere in the drawing to create new single-line text blocks in the DTEXT or TEXT commands.//\n\n[img[]]
''Bold''\n==Strike==\n__Underline__\n//Italic//\n2^^3^^=8\na~~ij~~ = -a~~ji~~\[email protected]@[email protected]@\[email protected]@color(green):green [email protected]@\[email protected]@bgcolor(#ff0000):color(#ffffff):red [email protected]@
The XREF command can now be used to see all externally referenced files in a central location, including drawing files, images, and DWF underlays.\n\n[img[]]
Find permits wildcards!
Object fields have been updated, enabling you to select objects between paper space and model space. LISP variables are also supported in fields.
FireFox lets you SaveChanges in TiddlyWiki, but you will see up to three dialogs asking your permission for the local file operations. You must allow all three operations for it to work properly. Note that you can select the //Remember this decision// option to avoid seeing the dialogs in future.
Released in September 2004, the [[first version|firstversion.html]] was pretty basic, weighing in at 52KB.
StyleSheetLayout\nStyleSheetColors\nSideBarTabs\n\n[[internal link(not existing)]]\n[[internal link(exists)|StyleSheet]]\n[[external link|]]\n[[a pretty link that doesn't exist|blahBlueBlah]]\n\n<<newTiddler>>\n\n!Header 1\n!!Header 2\n!!!Header 3\n!!!!Header 4\n!!!!!Header 5\n\n''Bold''\n==Strike==\n__Underline__\n//Italic//\n2^^3^^=8\na~~ij~~ = -a~~ji~~\[email protected]@[email protected]@\[email protected]@color(green):green [email protected]@\[email protected]@bgcolor(#ff0000):color(#ffffff):red [email protected]@\n\n[img[Selectutorial|][]]\n\n{{{\n Preformated text\n}}}\n\nI think this is {{{rendered as code}}}.\n\nTo make quoted bits of text stand out, you can use BlockQuotes within your [[tiddler]]s, like this:\n\nJeremyRuston said:\n<<<\nA TiddlyWiki is like a blog because it's divided up into neat little chunks, but it encourages you to read it by hyperlinking rather than sequentially: if you like, a non-linear blog analogue that binds the individual microcontent items into a cohesive whole.\n<<<\n\nLike BulletPoints and NumberedBulletPoints, you can have three different levels of BlockQuotes. Just [[edit]] this tiddler to see how it's done.\n\n>level 1\n>level 1\n>>level 2\n>>level 2\n>>>level 3\n>>>level 3\n>>level 2\n>level 1\n\nCreating BulletPoints is simple.\n* Just add an asterisk\n* at the beginning of a line.\n** If you want to create sub-bullets\n** start the line with two asterisks\n*** And if you want yet another level\n*** use three asterisks\n* Edit this tiddler to see how it's done\n* You can also do NumberedBulletPoints\n\nIt's easy to create NumberedBulletPoints.\n# Use a single '#' at the start of each line\n# and the tiddler will automatically\n# start numbering your list.\n## If you want a sub-list\n## within any bullets\n## add two '#'s at the start of the lines.\n# When you go back to a single '#'\n# the main numbered list will start up\n# where it left off.\nIt's just as simple to do normal BulletPoints.\n\nEdit this tiddler to see how to insert images.\n[img[Fractal vegetable|fractalveg.jpg]]\n(This curious vegetable is called 'Romanesque broccoli' and is one of [[my photos|]])\n\nYou can divide a tiddler into\n----\nsections by typing four dashes on a line by themselves\n\n*sample:\n|!th1111111111|!th2222222222|\n|>| colspan |\n| rowspan |left|\n|~| right|\n|bgcolor(#a0ffa0):colored| center |\n|caption|c\n\n*sample (changed caption and table headers):\n|caption|c\n|th1111111111|th2222222222|h\n|>| colspan |\n| rowspan |left|\n|~| right|\n|bgcolor(#a0ffa0):colored| center |\n\n|Standard Periodic Table (ref. Wikipedia)|c\n|| !1 | !2 |!| !3 | !4 | !5 | !6 | !7 | !8 | !9 | !10 | !11 | !12 | !13 | !14 | !15 | !16 | !17 | !18 |\n|!1|bgcolor(#a0ffa0): @@color(red):[email protected]@ |>|>|>|>|>|>|>|>|>|>|>|>|>|>|>|>||bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!2|bgcolor(#ff6666): Li |bgcolor(#ffdead): Be |>|>|>|>|>|>|>|>|>|>||bgcolor(#cccc99): B |bgcolor(#a0ffa0): C |bgcolor(#a0ffa0): @@color(red):[email protected]@ |bgcolor(#a0ffa0): @@color(red):[email protected]@ |bgcolor(#ffff99): @@color(red):[email protected]@ |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!3|bgcolor(#ff6666): Na |bgcolor(#ffdead): Mg |>|>|>|>|>|>|>|>|>|>||bgcolor(#cccccc): Al |bgcolor(#cccc99): Si |bgcolor(#a0ffa0): P |bgcolor(#a0ffa0): S |bgcolor(#ffff99): @@color(red):[email protected]@ |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!4|bgcolor(#ff6666): K |bgcolor(#ffdead): Ca ||bgcolor(#ffc0c0): Sc |bgcolor(#ffc0c0): Ti |bgcolor(#ffc0c0): V |bgcolor(#ffc0c0): Cr |bgcolor(#ffc0c0): Mn |bgcolor(#ffc0c0): Fe |bgcolor(#ffc0c0): Co |bgcolor(#ffc0c0): Ni |bgcolor(#ffc0c0): Cu |bgcolor(#ffc0c0): Zn |bgcolor(#cccccc): Ga |bgcolor(#cccc99): Ge |bgcolor(#cccc99): As |bgcolor(#a0ffa0): Se |bgcolor(#ffff99): @@color(green):[email protected]@ |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!5|bgcolor(#ff6666): Rb |bgcolor(#ffdead): Sr ||bgcolor(#ffc0c0): Y |bgcolor(#ffc0c0): Zr |bgcolor(#ffc0c0): Nb |bgcolor(#ffc0c0): Mo |bgcolor(#ffc0c0): Tc |bgcolor(#ffc0c0): Ru |bgcolor(#ffc0c0): Rh |bgcolor(#ffc0c0): Pd |bgcolor(#ffc0c0): Ag |bgcolor(#ffc0c0): Cd |bgcolor(#cccccc): In |bgcolor(#cccccc): Sn |bgcolor(#cccc99): Sb |bgcolor(#cccc99): Te |bgcolor(#ffff99): I |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!6|bgcolor(#ff6666): Cs |bgcolor(#ffdead): Ba |bgcolor(#ffbfff):^^*1^^|bgcolor(#ffc0c0): Lu |bgcolor(#ffc0c0): Hf |bgcolor(#ffc0c0): Ta |bgcolor(#ffc0c0): W |bgcolor(#ffc0c0): Re |bgcolor(#ffc0c0): Os |bgcolor(#ffc0c0): Ir |bgcolor(#ffc0c0): Pt |bgcolor(#ffc0c0): Au |bgcolor(#ffc0c0): @@color(green):[email protected]@ |bgcolor(#cccccc): Tl |bgcolor(#cccccc): Pb |bgcolor(#cccccc): Bi |bgcolor(#cccc99): Po |bgcolor(#ffff99): At |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!7|bgcolor(#ff6666): Fr |bgcolor(#ffdead): Ra |bgcolor(#ff99cc):^^*2^^|bgcolor(#ffc0c0): Lr |bgcolor(#ffc0c0): Rf |bgcolor(#ffc0c0): Db |bgcolor(#ffc0c0): Sq |bgcolor(#ffc0c0): Bh |bgcolor(#ffc0c0): Hs |bgcolor(#ffc0c0): Mt |bgcolor(#ffc0c0): Ds |bgcolor(#ffc0c0): Rg |bgcolor(#ffc0c0): @@color(green):[email protected]@ |bgcolor(#cccccc): Uut |bgcolor(#cccccc): Uuq |bgcolor(#cccccc): Uup |bgcolor(#cccccc): Uuh |bgcolor(#fcfecc): @@color(#cccccc):[email protected]@ |bgcolor(#ecfefc): @@color(#cccccc):[email protected]@ |\n\n| !Lanthanides^^*1^^|bgcolor(#ffbfff): La |bgcolor(#ffbfff): Ce |bgcolor(#ffbfff): Pr |bgcolor(#ffbfff): Nd |bgcolor(#ffbfff): Pm |bgcolor(#ffbfff): Sm |bgcolor(#ffbfff): Eu |bgcolor(#ffbfff): Gd |bgcolor(#ffbfff): Tb |bgcolor(#ffbfff): Dy |bgcolor(#ffbfff): Ho |bgcolor(#ffbfff): Er |bgcolor(#ffbfff): Tm |bgcolor(#ffbfff): Yb |\n| !Actinides^^*2^^|bgcolor(#ff99cc): Ac |bgcolor(#ff99cc): Th |bgcolor(#ff99cc): Pa |bgcolor(#ff99cc): U |bgcolor(#ff99cc): Np |bgcolor(#ff99cc): Pu |bgcolor(#ff99cc): Am |bgcolor(#ff99cc): Cm |bgcolor(#ff99cc): Bk |bgcolor(#ff99cc): Cf |bgcolor(#ff99cc): Es |bgcolor(#ff99cc): Fm |bgcolor(#ff99cc): Md |bgcolor(#ff99cc): No |\n\n*Chemical Series of the Periodic Table\n**@@bgcolor(#ff6666): Alkali [email protected]@\n**@@bgcolor(#ffdead): Alkaline earth [email protected]@\n**@@bgcolor(#ffbfff): [email protected]@\n**@@bgcolor(#ff99cc): [email protected]@\n**@@bgcolor(#ffc0c0): Transition [email protected]@\n**@@bgcolor(#cccccc): Poor [email protected]@\n**@@bgcolor(#cccc99): [email protected]@\n**@@bgcolor(#a0ffa0): [email protected]@\n**@@bgcolor(#ffff99): [email protected]@\n**@@bgcolor(#c0ffff): Noble [email protected]@\n\n*State at standard temperature and pressure\n**those in @@color(red):[email protected]@ are gases\n**those in @@color(green):[email protected]@ are liquids\n**those in black are solids
TiddlyWiki uses Wiki style markup, a way of lightly "tagging" plain text so it can be transformed into HTML. Edit this Tiddler to see samples.\n\n! Header Samples\n!Header 1\n!!Header 2\n!!!Header 3\n!!!!Header 4\n!!!!!Header 5\n\n! Unordered Lists:\n* Lists are where it's at\n* Just use an asterisk and you're set\n** To nest lists just add more asterisks...\n*** this\n* The circle makes a great bullet because once you've printed a list you can mark off completed items\n* You can also nest mixed list types\n## Like this\n\n! Ordered Lists\n# Ordered lists are pretty neat too\n# If you're handy with HTML and CSS you could customize the [[numbering scheme|]]\n## To nest, just add more octothorpes (pound signs)...\n### Like this\n* You can also\n** Mix list types\n*** like this\n# Pretty neat don't you think?\n\n! Tiddler links\nTo create a Tiddler link, just use mixed-case WikiWord, or use [[brackets]] for NonWikiWordLinks. This is how the GTD style [[@Action]] lists are created. \n\nNote that existing Tiddlers are in bold and empty Tiddlers are in italics. See CreatingTiddlers for details.\n\n! External Links\nYou can link to [[external sites|]] with brackets. You can also LinkToFolders on your machine or network shares.\n\n! Images\nEdit this tiddler to see how it's done.\n[img[]]\n\n!Tables\n|!th1111111111|!th2222222222|\n|>| colspan |\n| rowspan |left|\n|~| right|\n|colored| center |\n|caption|c\n\nFor a complex table example, see PeriodicTable.\n\n! Horizontal Rules\nYou can divide a tiddler into\n----\nsections by typing four dashes on a line by themselves.\n\n! Blockquotes\n<<<\nThis is how you do an extended, wrapped blockquote so you don't have to put angle quotes on every line.\n<<<\n>level 1\n>level 1\n>>level 2\n>>level 2\n>>>level 3\n>>>level 3\n>>level 2\n>level 1\n\n! Other Formatting\n''Bold''\n==Strike==\n__Underline__\n//Italic//\nSuperscript: 2^^3^^=8\nSubscript: a~~ij~~ = -a~~ji~~\[email protected]@[email protected]@\[email protected]@color(green):green [email protected]@\[email protected]@bgcolor(#ff0000):color(#ffffff):red [email protected]@\n
[[Forum for discussion of GTDTW|]]. Supercedes the GoogleGroup. Anyone can read posts, but a simple registration is required for posting (privacy guaranteed).
See [[About GTD TiddlyWiki]].
Getting Things Done is a simple and effective personal productivity method by David Allen. You can [[get the book from Amazon|]].\n\nAlso check out the GTD community at the 43Folders [[website|]], [[wiki|]], and [[newsgroup|]].\n\n----\n"Getting Things Done" is © David Allen at [[Davidco|]]. Davidco has no affiliation with TiddlyWiki or GTDTiddlyWiki.
/***\nThis is a simple patch to TW that gives the first tiddler a class of ~IEFirstChild since IE 6 can't use the pseudo class 'first-child' for CSS selection. That is necessary for proper page-break printing.\n\nThe closeTiddler part is a little trickier because it has to factor in DOM changes due to animation.\n***/\n\n//{{{\nStory.prototype.closeTiddlerIEFirstChild = Story.prototype.closeTiddler;\nStory.prototype.closeTiddler = function(title,animate,slowly){\n var storyArea = document.getElementById(this.idPrefix + title).parentNode;\n if ((this.idPrefix + title) =={\n removeClass(storyArea.firstChild,"IEFirstChild");\n addClass(storyArea.firstChild.nextSibling,"IEFirstChild");\n }\n story.closeTiddlerIEFirstChild(title,animate,slowly);\n addClass(storyArea.firstChild,"IEFirstChild");\n}\n\nStory.prototype.displayTiddlerIEFirstChild = Story.prototype.displayTiddler;\nStory.prototype.displayTiddler = function(srcElement,title,template,animate,slowly){\n var storyArea = document.getElementById(this.container);\n if (storyArea.firstChild) removeClass(storyArea.firstChild,"IEFirstChild");\n story.displayTiddlerIEFirstChild(srcElement,title,template,animate,slowly);\n addClass(storyArea.firstChild,"IEFirstChild");\n}\n//}}}
The [[Google Group|]] has been superceded by the GTDTWForum
* [[Annotation Time-Savers]]\n* [[Dimension Improvements]]\n
Edit this to see how to create Headers\n\n!Header 1\n!!Header 2\n!!!Header 3\n!!!!Header 4\n!!!!!Header 5\n
Welcome to the GTDTiddlyWiki, an experimental MicroContent WikiWikiWeb originally built by JeremyRuston and adapted for GTD use by NathanBowers. It's written in HTML, CSS and JavaScript to run on any modern browser without needing any ServerSide logic. It allows anyone to create personal SelfContained hypertext documents that can be posted to any web server, sent by email or kept on a USB thumb drive to make a WikiOnAStick.
AKA: "Personal Analog Assistant"\n\nA fun term for running your GTD lists from index cards. See [[43Folders|]] for the full rundown (be sure to check the trackbacks. Also check out [[Adam Gurno's|]] ideas for printing your own special cards.
When GTDTiddlyWiki is updated with enhancements and fixes, here's how to upgrade while keeping your data.\n\n* Just to be safe, create a backup of your current file and archive it somewhere.\n\nOkay then:\n* Open your TiddlyWiki file (say it's called "mystuff.html") in a browser.\n* Without closing that page, right-click on [[this link|#]], select 'Save target' or 'Save link' and save it as "mystuff.html", replacing your existing file\n* Now go back to the previously opened copy of "mystuff.html" in your browser and click "save changes" in the sidebar.\n* Refresh the page in the browser to verify that the upgrade has worked
*sample:\n|!th1111111111|!th2222222222|\n|>| colspan |\n| rowspan |left|\n|~| right|\n|bgcolor(#a0ffa0):colored| center |\n|caption|c\n*another sample: see PeriodicTable.\n
Set IMAGEFRAME to 2 to display but not plot the frame.
When you type more than three characters in the search box at the upper right, any matching tiddlers are automatically displayed with the text highlighted. There's a couple of minor issues: the highlights don't get removed when you clear the search, and occasionally, on some browsers, keystrokes get missed if you type quickly so you may need to click the 'search' button to manually trigger the search.
InterfaceOptions are displayed when you click the 'options' button on the right. They are saved in a cookie on your browser, making them sticky between visits. RegExpSearch allows more complex search expressions; CaseSensitiveSearch does as it's name implies. The user name for edits should be set //before// starting to edit things (ouch. another bug).
InternetExplorer on Windows allows you to SaveChanges in TiddlyWiki. It will give you an ActiveX warning, and ask for your permission to proceed each time. It should work from version 4, but I have only extensively tested against version 6. I have found some annoying difficulties with XpServicePack2, but there's always FireFox.
The creator of TiddlyWiki and a technologist based in London. He does consultancy work through his company [[Osmosoft|]], as well as pursuing some independent projects like TiddlyWiki.
This command combines individual segments of like objects into a single object. The objects do not have to meet. You can also use Join to combine lines and arcs with plines (although I prefer PEDIT for polylines). Join works on plines, lines, arc, elliptical arcs, and splines.\n\n[img[]]
* All your action lists live in one HTML file, ideal for portability and simplicity.\n* [[Print3x5]] cards for your HipsterPDA right from your browser.\n* Runs locally, no network connection needed.\n* User defined CustomStyleSheet\n* Built with HTML, CSS, and Javascript, so it's easy to modify.\n* Really good incremental and regular expression search.\n* Your updates are date and name stamped (hover over the Timeline entries).\n* Your most recent version is automatically backed up when you SaveChanges (You can edit the Javascript to do incremental time-stamped backups. See the RevisionHistory for details).\n* Presumably, TiddlyWiki could run on a capable handheld device, but this is untested.
* Double click on a Tidder entry to edit it.\n* [Control + Enter] accepts your changes and switches out of editing mode\n* [Escape] abandons your changes and reverts the tiddler to it's previous state
!Bugs\n* ==StyleSheet suffers from a bug that truncates long entries with many non-alphanumeric characters, so if you try to put the entire set of styles in there, it probably won't work.==\n* =="Highlighted" and Hexidecimal colored text formatting is broken==\n* When printing WIN/IE 6 inserts one blank page because it does not recognize the :first-child CSS pseudo element.\n* ==WIN/IE 6 messes up list items when you edit a Tiddler with multiple headings.==\n\n!Annoyances\n* You have to do a lot to customize your browser print settings to remove the page URL, pagination, timestamp, and ensure that the output is sized and paged correctly.\n* Firefox/Mac has no "page properties" interface for removing the page URL, page numbers, etc... from printed pages. This is pretty lame. Try entering about:config in Firefox's URL bar and look for "print" to configure it the hard way. Ask the Firefox development team to fix this.\n\n!Help out\n* If you encounter new bugs, can help fix bugs, or can help make this usable in other browsers, or handhelds, go to the GTDTWForum. Thanks!
!!New Layer Filter Warning\n\nThe new system variable LAYERFILTERALERT warns you when you have too many layer filters and can be used to delete any unwanted ones. For maximum flexibility be sure to set LAYERFILTERALERT to 3.\n\n//''Tip:'' Use the FILTERS command to quickly removed extra layer filters.//\n\n//Note: Selecting the Indicate Layers in Use option in the Layer Properties Manager could dramatically slow down software performance.//\n\n!!Layer Express Tools Now Integrated into Core AutoCAD\n\nUnder Format>Layer Tools, you’ll find popular commands such as\n* //Layer Walk:// This powerful command makes it easy to see which objects reside on which layer.\n* //Layer Isolate:// Isolate a layer (turn all other layers off) by selecting an object on the desired layer.\n* //Copy to Layer:// Copy objects from one layer to another.\n* //Isolate Layer to Current Viewport:// Freezes the layer in all but the current viewport.\n* //Layer Delete:// Deletes the layer of a selected object and all objects on the layer, and purges the layer from the drawing. This command takes no prisoners!\n* //Layer Merge:// Merges selected layers together.\n* //Chspace:// Moves objects from paper space to model space, or vice versa. The moved object is scaled appropriately in the new space.
Good lighting is key for visualizing and rendering a shaded 3D model. By default, the lighting is from two distant sources that follow the viewpoint as you move around the model. All faces are illuminated, and you control the brightness and contrast.\n\n!!Creating Lights\nYou can create point, spot, and distant lights for more control over lighting (LIGHT command). Most user-created lights display glyphs.\n\nUse LIGHTLIST to display all your lights.\n\n[img[]]\n\n* Point Lights: Similar to light bulbs, point lights radiate light in all directions. The intensity diminishes over distance, unless attenuation is set to None.\n* Spotlights: Spotlights are useful for highlighting specific areas in your model because they emit a directional cone of light. The intensity of spotlights diminishes over distance.\n* Distant Lights: Distant lights are useful for lighting objects uniformly. They emit uniform parallel light rays in one direction. The From and To points define the direction. The intensity remains the same over distance (no light glyphs).\n\n//''Tip:'' Distant lights are the least performance intensive.//\n\n!!Sun Studies\nSimilar to distant light, you define the geographic location, date, and time of day. Sun studies are valuable for showing the effects of shadows throughout the day. You can change the intensity and the color of the light (SUNPROPERTIES). The rays of the sun are parallel and have the same intensity at any distance.\n\n//''Tip:'' Easily perform a dynamic sun study from the dashboard.//
The format for PrettyLinks allows for links that open local or network folders. Depending on your browser and operating system, the folders are opened in Windows Explorer, the OS X Finder, or the browser itself.\n\nEdit this tiddler to see [[this link to a Windows network share|file://server/share/folder/path/name]], [[this link to a Windows drive-mapped folder|file:///c:/folder/path/name]] and [[this link to a Unix-style folder|file:///folder/path/name]].
[img[]]\n\nLynn Allen, Cadalyst columnist and Autodesk technical evangelist, speaks to more than 30,000 AutoCAD users worldwide each year. For the past 12 years she has written a monthly column in Cadalyst magazine called “Circles and Lines.” Lynn started using AutoCAD software with Release 1.4—more than 20 years ago. She has taught at the corporate and collegiate levels for 14 years and authored several books about AutoCAD. She is consistently one of the highest-rated speakers at Autodesk University and is a sought after public speaker with a unique comedic style. Visit Lynn Allen’s blog at [[|]].
*[[User Interface]] \n*[[3D Tools]] \n*[[3D Solids & Surfaces]] \n*[[3D Viewing]] \n*[[Productivity Tips]] \n*[[Visualization]] \n*[[Hatching & Dimensioning]] \n*[[Dynamic Blocks]] \n*[[Step Savers]] \n*[[Customize]] \n*[[Share]]\n+++![Calendar]\n<<calendar thismonth>>\n===\n*<<upload>>\n\n*FormattingInstructions\n*DefaultTiddlers\n*<<newTiddler>>\n*MainMenu
MicroContent being a fashionable word for self-contained fragments of content that are typically smaller than entire pages. Often MicroContent is presented via some kind of aggregation that reduces the perceptual shock and resource cost of context switching (eg Blogs aggregating several entries onto a page or Flickr presenting photos in an album). This TiddlyWiki aggregates MicroContent items that I call 'tiddlers' into pages that are loaded in one gulp and progressively displayed as the user clicks hypertext links to read them.
It’s easy to migrate existing menu files to the new CUI format using the Transfer tab in the CUI command. \n\nUse the Customize tab to modify pulldown menus, toolbars, keyboard shortcuts, shortcut menus, and input device buttons. This friendly drag-and-drop system makes it easy to personalize AutoCAD to your individual needs.
Regain valuable screen space by hiding the layout and model tabs. Right-click over the model or layout tabs and choose Hide Model and Layout Tabs. Get to your layouts by selecting them from the status\nbar buttons (speedy!).
Trim and Extend work on MLINES.
* Whatever you find interesting \n\nThis document for AutoCAD
Nathan is a web developer based in Los Angeles. His website is [[|]]. Have questions, comments, or suggestions? Visit the GTDTWForum.
/***\n''NestedSlidersPlugin for TiddlyWiki version 1.2.x and 2.0''\n^^author: Eric Shulman\nsource:\nlicense: [[Creative Commons Attribution-ShareAlike 2.5 License|]]^^\n\nQuickly make any tiddler content into an expandable 'slider' panel, without needing to create a separate tiddler to contain the slider content. Optional syntax allows ''default to open'', ''custom button label/tooltip'' and ''automatic blockquote formatting.''\n\nYou can also 'nest' these sliders as deep as you like (see complex nesting example below), so that expandable 'tree-like' hierarchical displays can be created. This is most useful when converting existing in-line text content to create in-line annotations, footnotes, context-sensitive help, or other subordinate information displays.\n\nFor more details, please click on a section headline below:\n++++!!!!![Configuration]>\nDebugging messages for 'lazy sliders' deferred rendering:\n<<option chkDebugLazySliderDefer>> show debugging alert when deferring slider rendering\n<<option chkDebugLazySliderRender>> show debugging alert when deferred slider is actually rendered\n//''note: Enabling these settings may produce unexpected results. Use at your own risk.''//\n===\n++++!!!!![Usage]>\nWhen installed, this plugin adds new wiki syntax for embedding 'slider' panels directly into tiddler content. Use {{{+++}}} and {{{===}}} to delimit the slider content. Additional optional syntax elements let you specify 'default to open', 'cookiename', 'heading level', 'custom label/tooltip', 'automatic blockquote' and 'deferred rendering'.\n//{{{\n++++(cookiename)!!!!![label|tooltip]>...\ncontent goes here\n===\n//}}}\nwhere:\n* {{{+++}}} (or {{{++++}}}) and {{{===}}}^^\nmarks the start and end of the slider definition, respectively. When the extra {{{+}}} is used, the slider will be open when initially displayed.^^\n* {{{(cookiename)}}}^^\nsave the slider opened/closed state, and restore this state whenever the slider is re-rendered.^^\n* {{{!}}} through {{{!!!!!}}}^^\ndisplays the slider label using a formatted headline (Hn) style instead of a button/link style^^\n* {{{[label]}}} or {{{[label|tooltip]}}}^^\nuses custom label/tooltip. (defaults are: ">/more..." and "</less...")^^\n* {{{">"}}} //(without the quotes)//^^\nautomatically adds blockquote formatting to slider content^^\n* {{{"..."}}} //(without the quotes)//^^\ndefers rendering of closed sliders until the first time they are opened. //Note: deferred rendering may produce unexpected results in some cases. Use with care.//^^\n\n//Note: to make slider definitions easier to read and recognize when editing a tiddler, newlines immediately following the {{{+++}}} 'start slider' or preceding the {{{===}}} 'end slider' sequence are automatically supressed so that excess whitespace is eliminated from the output.//\n===\n++++!!!!![Examples]>\nsimple in-line slider: \n{{{\n+++\n content\n===\n}}}\n+++\n content\n===\n----\ndefault to open: \n{{{\n++++\n content\n===\n}}}\n++++\n content\n===\n----\nuse a custom label: \n{{{\n+++[label]\n content\n===\n}}}\n+++[label]\n content\n===\n----\nuse a custom label and tooltip: \n{{{\n+++[label|tooltip]\n content\n===\n}}}\n+++[label|tooltip]\n content\n===\n----\ncontent automatically blockquoted: \n{{{\n+++>\n content\n===\n}}}\n+++>\n content\n===\n----\nall options combined //(default open, custom label/tooltip, blockquoted)//\n{{{\n++++(testcookie)[label|tooltip]>\n content\n===\n}}}\n++++(testcookie)[label|tooltip]>\n content\n===\n----\ncomplex nesting example:\n{{{\n+++[get info...|click for information]>\n put some general information here, plus a slider with more specific info:\n +++[view details...|click for details]>\n put some detail here, which could include some +++[definitions]>explaining technical terms===\n ===\n===\n}}}\n+++[get info...|click for information]>\n put some general information here, plus a slider with more specific info:\n +++[view details...|click for details]>\n put some detail here, which could include some +++[definitions]>explaining technical terms===\n === \n=== \n===\n+++!!!!![Installation]>\nimport (or copy/paste) the following tiddlers into your document:\n''NestedSlidersPlugin'' (tagged with <<tag systemConfig>>)\n===\n+++!!!!![Revision History]>\n\n++++[2006.01.03 - 1.6.2]\nWhen using optional "!" heading style, instead of creating a clickable "Hn" element, create an "A" element inside the "Hn" element. (allows click-through in SlideShowPlugin, which captures nearly all click events, except for hyperlinks)\n===\n\n+++[2005.12.15 - 1.6.1]\nadded optional "..." syntax to invoke deferred ('lazy') rendering for initially hidden sliders\nremoved checkbox option for 'global' application of lazy sliders\n===\n\n+++[2005.11.25 - 1.6.0]\nadded optional handling for 'lazy sliders' (deferred rendering for initially hidden sliders)\n===\n\n+++[2005.11.21 - 1.5.1]\nrevised regular expressions: if present, a single newline //preceding// and/or //following// a slider definition will be suppressed so start/end syntax can be place on separate lines in the tiddler 'source' for improved readability. Similarly, any whitespace (newlines, tabs, spaces, etc.) trailing the 'start slider' syntax or preceding the 'end slider' syntax is also suppressed.\n===\n\n+++[2005.11.20 - 1.5.0]\n added (cookiename) syntax for optional tracking and restoring of slider open/close state\n===\n\n+++[2005.11.11 - 1.4.0]\n added !!!!! syntax to render slider label as a header (Hn) style instead of a button/link style\n===\n\n+++[2005.11.07 - 1.3.0]\n removed alternative syntax {{{(((}}} and {{{)))}}} (so they can be used by other\n formatting extensions) and simplified/improved regular expressions to trim multiple excess newlines\n===\n\n+++[2005.11.05 - 1.2.1]\n changed name to NestedSlidersPlugin\n more documentation\n===\n\n+++[2005.11.04 - 1.2.0]\n added alternative character-mode syntax {{{(((}}} and {{{)))}}}\n tweaked "eat newlines" logic for line-mode {{{+++}}} and {{{===}}} syntax\n===\n\n+++[2005.11.03 - 1.1.1]\n fixed toggling of default tooltips ("more..." and "less...") when a non-default button label is used\n code cleanup, added documentation\n===\n\n+++[2005.11.03 - 1.1.0]\n changed delimiter syntax from {{{(((}}} and {{{)))}}} to {{{+++}}} and {{{===}}}\n changed name to EasySlidersPlugin\n===\n\n+++[2005.11.03 - 1.0.0]\n initial public release\n===\n\n===\n+++!!!!![Credits]>\nThis feature was implemented by EricShulman from [[ELS Design Studios|http:/]] based on considerable research, programming and suggestions from RodneyGomes, GeoffSlocock, and PaulPetterson\n===\n***/\n// //+++!!!!![Code]\n//{{{\nversion.extensions.nestedSliders = {major: 1, minor: 6, revision: 2, date: new Date(2006,1,3)};\n//}}}\n\n//{{{\n// options for deferred rendering of sliders that are not initially displayed\nif (config.options.chkDebugLazySliderDefer==undefined) config.options.chkDebugLazySliderDefer=false;\nif (config.options.chkDebugLazySliderRender==undefined) config.options.chkDebugLazySliderRender=false;\n//}}}\n\n//{{{\nconfig.formatters.push( {\n name: "nestedSliders",\n match: "\s\sn?\s\s+{3}",\n terminator: "\s\ss*\s\s={3}\s\sn?",\n lookahead: "\s\sn?\s\s+{3}(\s\s+)?(\s\s([^\s\s)]*\s\s))?(\s\s!*)?(\s\s[[^\s\s]]*\s\s])?(\s\s>?)(\s\s.\s\s.\s\s.)?\s\ss*",\n handler: function(w)\n {\n var lookaheadRegExp = new RegExp(this.lookahead,"mg");\n lookaheadRegExp.lastIndex = w.matchStart;\n var lookaheadMatch = lookaheadRegExp.exec(w.source)\n if(lookaheadMatch && lookaheadMatch.index == w.matchStart)\n {\n // default to closed, no cookie\n var show="none"; var title=">"; var tooltip="show"; var cookie="";\n\n // extra "+", default to open\n if (lookaheadMatch[1])\n { show="block"; title="<"; tooltip="hide"; }\n\n // cookie, use saved open/closed state\n if (lookaheadMatch[2]) {\n cookie=lookaheadMatch[2].trim().substr(1,lookaheadMatch[2].length-2);\n cookie="chkSlider"+cookie;\n if (config.options[cookie]==undefined)\n { config.options[cookie] = (show=="block") }\n if (config.options[cookie])\n { show="block"; title="<"; tooltip="hide"; }\n else\n { show="none"; title=">"; tooltip="show"; }\n }\n\n // custom label/tooltip\n if (lookaheadMatch[4]) {\n title = lookaheadMatch[4].trim().substr(1,lookaheadMatch[4].length-2);\n if ((pos=title.indexOf("|")) != -1)\n { tooltip = title.substr(pos+1,title.length); title = title.substr(0,pos); }\n else\n { tooltip += " "+title; }\n }\n // use "Hn" header format instead of button/link\n if (lookaheadMatch[3]) {\n var lvl=(lookaheadMatch[3].length>6)?6:lookaheadMatch[3].length;\n var btn = createTiddlyElement(createTiddlyElement(w.output,"h"+lvl,null,null,null),"a",null,null,title);\n btn.onclick=onClickNestedSlider;\n btn.setAttribute("href","javascript:;");\n btn.setAttribute("title",tooltip);\n\n }\n else\n var btn = createTiddlyButton(w.output,title,tooltip,onClickNestedSlider);\n var panel = createTiddlyElement(w.output,"span",null,"sliderPanel",null);\n btn.sliderCookie = cookie;\n btn.sliderPanel = panel;\n = show;\n w.nextMatch = lookaheadMatch.index + lookaheadMatch[0].length;\n if (!lookaheadMatch[6] || show=="block") {\n w.subWikify(lookaheadMatch[5]?createTiddlyElement(panel,"blockquote"):panel,this.terminator);\n }\n else {\n var src = w.source.substr(w.nextMatch);\n var endpos=findMatchingDelimiter(src,"+++","===");\n panel.setAttribute("raw",src.substr(0,endpos));\n panel.setAttribute("blockquote",lookaheadMatch[5]?"true":"false");\n panel.setAttribute("rendered","false");\n w.nextMatch += endpos+3;\n if (w.source.substr(w.nextMatch,1)=="\sn") w.nextMatch++;\n if (config.options.chkDebugLazySliderDefer)\n alert("deferred '"+title+"':\sn\sn"+panel.getAttribute("raw"));\n }\n }\n }\n }\n)\n\n// TBD: ignore 'quoted' delimiters (e.g., "{{{+++foo===}}}" isn't really a slider)\nfunction findMatchingDelimiter(src,starttext,endtext) {\n var startpos = 0;\n var endpos = src.indexOf(endtext);\n // check for nested delimiters\n while (src.substring(startpos,endpos-1).indexOf(starttext)!=-1) {\n // count number of nested 'starts'\n var startcount=0;\n var temp = src.substring(startpos,endpos-1);\n var pos=temp.indexOf(starttext);\n while (pos!=-1) { startcount++; pos=temp.indexOf(starttext,pos+starttext.length); }\n // set up to check for additional 'starts' after adjusting endpos\n startpos=endpos+endtext.length;\n // find endpos for corresponding number of matching 'ends'\n while (startcount && endpos!=-1) {\n endpos = src.indexOf(endtext,endpos+endtext.length);\n startcount--;\n }\n }\n return (endpos==-1)?src.length:endpos;\n}\n//}}}\n\n//{{{\nfunction onClickNestedSlider(e)\n{\n if (!e) var e = window.event;\n var theTarget = resolveTarget(e);\n var theLabel =;\n var theSlider = theTarget.sliderPanel\n var isOpen =!="none";\n // if using default button labels, toggle labels\n if (theLabel==">") = "<";\n else if (theLabel=="<") = ">";\n // if using default tooltips, toggle tooltips\n if (theTarget.getAttribute("title")=="show")\n theTarget.setAttribute("title","hide");\n else if (theTarget.getAttribute("title")=="hide")\n theTarget.setAttribute("title","show");\n if (theTarget.getAttribute("title")=="show "+theLabel)\n theTarget.setAttribute("title","hide "+theLabel);\n else if (theTarget.getAttribute("title")=="hide "+theLabel)\n theTarget.setAttribute("title","show "+theLabel);\n // deferred rendering (if needed)\n if (theSlider.getAttribute("rendered")=="false") {\n if (config.options.chkDebugLazySliderRender)\n alert("rendering '"+theLabel+"':\sn\sn"+theSlider.getAttribute("raw"));\n var place=theSlider;\n if (theSlider.getAttribute("blockquote")=="true")\n place=createTiddlyElement(place,"blockquote");\n wikify(theSlider.getAttribute("raw"),place);\n theSlider.setAttribute("rendered","true");\n }\n // show/hide the slider\n// DISABLED: animation sets overflow:hidden, which clips nested sliders...\n// if(config.options.chkAnimate)\n// anim.startAnimating(new Slider(theSlider,!isOpen,e.shiftKey || e.altKey,"none"));\n// else\n = isOpen ? "none" : "block";\n if (this.sliderCookie && this.sliderCookie.length)\n { config.options[this.sliderCookie]=!isOpen; saveOptionCookie(this.sliderCookie); }\n return false;\n}\n//}}}\n// //===
This ThirdVersion of TiddlyWiki adds:\n* the ability to easily SaveChanges on FireFox and InternetExplorer\n* a new liquid CSS layout that fills the width of the browser window\n* InterfaceOptions revealed by clicking the new 'options' button on the right\n* some BugFixes\n* KeyboardShortcuts so you can finish editing a tiddler with Control-Enter or abandon it with Escape\n* a more flexible OpenSourceLicense\n* a bunch of features from IsaoSonobe's [[adaptation|]] of TiddlyWiki including ExtendedFormatting, NonWikiWordLinks, PrettyLinks, [[Headings]], BulletPoints, NumberedLists, HtmlTables, BlockQuotes, HorizontalRules and...\n* ...EmbeddedImages:\n[img[]]
TiddlyWiki is a spare time project that I'm making available under an OpenSourceLicense. Accordingly, there's no warranty on it, and you can only use it at your own risk. To report bugs go to the GTDTWForum.
To make a tiddler that doesn't have a WikiWord as it's name, you can enclose the name in [[double square brackets]] - edit this tiddler to see an example. After saving the tiddler you can then click on the link to create the new tiddler. NonWikiWordLinks permits tiddlers to be created with names that are made from character sets that don't have upper and lower case.
This new tab focuses entirely on the new 3D functionality. Here are some highlights:\n\n!Dynamic Input\nAdds a Z coordinate field when using dynamic input. Be sure to turn this on!\n\n[img[]]\n\n!3D Objects\nControls the display of 3D solids and surfaces.\n\n[img[]]\n\n//Visual Style While Creating 3D Objects:// One means of switching Visual Styles (I prefer the dashboard).\n\n//Deletion Control While Creating 3D Objects:// This key setting controls whether the profile and path curves are deleted once your 3D object is created. You may also choose to be prompted each time.\n\n//U and V Isolines on Surfaces and Meshes:// Controls the number of isolines for surfaces and meshes.\n\n!3D Navigation\nIf you’ve used Autodesk Inventor® software, you’ve noticed the wheel zoom is the opposite of AutoCAD® software. Now you can match them!\n\nThis section also enables you to control walk, fly, and animation settings.\n\n[img[]]
TiddlyWiki is published under a BSD OpenSourceLicense that gives you the freedom to use it pretty much however you want, including for commercial purposes, as long as you keep my copyright notice. I'd appreciate a link back to as well.
<div id='header'>\n<div id='titleLine'>\n<span id='siteTitle' refresh='content' tiddler='SiteTitle'></span>\n<span id='siteSubtitle' refresh='content' tiddler='SiteSubtitle'></span>\n</div>\n</div>\n<div id='sidebar'>\n<div id='mainMenu' refresh='content' tiddler='MainMenu'></div>\n<div id='sidebarOptions' refresh='content' tiddler='SideBarOptions'></div>\n<div id='sidebarTabs' refresh='content' force='true' tiddler='SideBarTabs'></div><div id="licensePanel">\n<a rel="license" href="" target="_new">GTDTW Version <span macro="version"></span></a>\n<a rel="license" href="" target="_new">\nTiddlyWiki is published by Jeremy Ruston at Osmosoft under a BSD open source license</a>\n<a rel="license" href="" target="_new">GTD TiddlyWiki is a modification by Nathan Bowers at Snapgrid under the same license terms.</a>\n<a rel="license" href="" target="_new">"Getting Things Done" is &#169; David Allen at Davidco. Davidco has no affiliation with TiddlyWiki or GTD TiddlyWiki.</a></div></div>\n<div id='displayArea'>\n<div id='messageArea'></div>\n<div id='tiddlerDisplay'></div>
Think of parameters as dimensions that drive the block geometry. Examples include\n* Linear parameter to a door block to drive the width of a door (combine with Stretch Action).\n* Rotation parameter to a chair of a table and chairs block permits individual rotation of the chair after insertion (combine\nwith Rotate Action).\n\nSelecting the properties of a parameter enables you to specify increments as well as minimum and maximum values.\n\nVisibility parameters are used to assign multiple definitions to one block. Lookup parameters might be used to assign multiple sizes of a specific block. A simple right-click enables you to change from one size to another.\n\n[img[]]\n\n//''Note:'' AutoCAD 2007 automatically enables Reverse Lookup when multiple input properties are included with a lookup table.//
|Standard Periodic Table (ref. Wikipedia)|c\n|| !1 | !2 |!| !3 | !4 | !5 | !6 | !7 | !8 | !9 | !10 | !11 | !12 | !13 | !14 | !15 | !16 | !17 | !18 |\n|!1|bgcolor(#a0ffa0): @@color(red):[email protected]@ |>|>|>|>|>|>|>|>|>|>|>|>|>|>|>|>||bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!2|bgcolor(#ff6666): Li |bgcolor(#ffdead): Be |>|>|>|>|>|>|>|>|>|>||bgcolor(#cccc99): B |bgcolor(#a0ffa0): C |bgcolor(#a0ffa0): @@color(red):[email protected]@ |bgcolor(#a0ffa0): @@color(red):[email protected]@ |bgcolor(#ffff99): @@color(red):[email protected]@ |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!3|bgcolor(#ff6666): Na |bgcolor(#ffdead): Mg |>|>|>|>|>|>|>|>|>|>||bgcolor(#cccccc): Al |bgcolor(#cccc99): Si |bgcolor(#a0ffa0): P |bgcolor(#a0ffa0): S |bgcolor(#ffff99): @@color(red):[email protected]@ |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!4|bgcolor(#ff6666): K |bgcolor(#ffdead): Ca ||bgcolor(#ffc0c0): Sc |bgcolor(#ffc0c0): Ti |bgcolor(#ffc0c0): V |bgcolor(#ffc0c0): Cr |bgcolor(#ffc0c0): Mn |bgcolor(#ffc0c0): Fe |bgcolor(#ffc0c0): Co |bgcolor(#ffc0c0): Ni |bgcolor(#ffc0c0): Cu |bgcolor(#ffc0c0): Zn |bgcolor(#cccccc): Ga |bgcolor(#cccc99): Ge |bgcolor(#cccc99): As |bgcolor(#a0ffa0): Se |bgcolor(#ffff99): @@color(green):[email protected]@ |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!5|bgcolor(#ff6666): Rb |bgcolor(#ffdead): Sr ||bgcolor(#ffc0c0): Y |bgcolor(#ffc0c0): Zr |bgcolor(#ffc0c0): Nb |bgcolor(#ffc0c0): Mo |bgcolor(#ffc0c0): Tc |bgcolor(#ffc0c0): Ru |bgcolor(#ffc0c0): Rh |bgcolor(#ffc0c0): Pd |bgcolor(#ffc0c0): Ag |bgcolor(#ffc0c0): Cd |bgcolor(#cccccc): In |bgcolor(#cccccc): Sn |bgcolor(#cccc99): Sb |bgcolor(#cccc99): Te |bgcolor(#ffff99): I |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!6|bgcolor(#ff6666): Cs |bgcolor(#ffdead): Ba |bgcolor(#ffbfff):^^*1^^|bgcolor(#ffc0c0): Lu |bgcolor(#ffc0c0): Hf |bgcolor(#ffc0c0): Ta |bgcolor(#ffc0c0): W |bgcolor(#ffc0c0): Re |bgcolor(#ffc0c0): Os |bgcolor(#ffc0c0): Ir |bgcolor(#ffc0c0): Pt |bgcolor(#ffc0c0): Au |bgcolor(#ffc0c0): @@color(green):[email protected]@ |bgcolor(#cccccc): Tl |bgcolor(#cccccc): Pb |bgcolor(#cccccc): Bi |bgcolor(#cccc99): Po |bgcolor(#ffff99): At |bgcolor(#c0ffff): @@color(red):[email protected]@ |\n|!7|bgcolor(#ff6666): Fr |bgcolor(#ffdead): Ra |bgcolor(#ff99cc):^^*2^^|bgcolor(#ffc0c0): Lr |bgcolor(#ffc0c0): Rf |bgcolor(#ffc0c0): Db |bgcolor(#ffc0c0): Sq |bgcolor(#ffc0c0): Bh |bgcolor(#ffc0c0): Hs |bgcolor(#ffc0c0): Mt |bgcolor(#ffc0c0): Ds |bgcolor(#ffc0c0): Rg |bgcolor(#ffc0c0): @@color(green):[email protected]@ |bgcolor(#cccccc): Uut |bgcolor(#cccccc): Uuq |bgcolor(#cccccc): Uup |bgcolor(#cccccc): Uuh |bgcolor(#fcfecc): @@color(#cccccc):[email protected]@ |bgcolor(#ecfefc): @@color(#cccccc):[email protected]@ |\n\n| !Lanthanides^^*1^^|bgcolor(#ffbfff): La |bgcolor(#ffbfff): Ce |bgcolor(#ffbfff): Pr |bgcolor(#ffbfff): Nd |bgcolor(#ffbfff): Pm |bgcolor(#ffbfff): Sm |bgcolor(#ffbfff): Eu |bgcolor(#ffbfff): Gd |bgcolor(#ffbfff): Tb |bgcolor(#ffbfff): Dy |bgcolor(#ffbfff): Ho |bgcolor(#ffbfff): Er |bgcolor(#ffbfff): Tm |bgcolor(#ffbfff): Yb |\n| !Actinides^^*2^^|bgcolor(#ff99cc): Ac |bgcolor(#ff99cc): Th |bgcolor(#ff99cc): Pa |bgcolor(#ff99cc): U |bgcolor(#ff99cc): Np |bgcolor(#ff99cc): Pu |bgcolor(#ff99cc): Am |bgcolor(#ff99cc): Cm |bgcolor(#ff99cc): Bk |bgcolor(#ff99cc): Cf |bgcolor(#ff99cc): Es |bgcolor(#ff99cc): Fm |bgcolor(#ff99cc): Md |bgcolor(#ff99cc): No |\n\n*Chemical Series of the Periodic Table\n**@@bgcolor(#ff6666): Alkali [email protected]@\n**@@bgcolor(#ffdead): Alkaline earth [email protected]@\n**@@bgcolor(#ffbfff): [email protected]@\n**@@bgcolor(#ff99cc): [email protected]@\n**@@bgcolor(#ffc0c0): Transition [email protected]@\n**@@bgcolor(#cccccc): Poor [email protected]@\n**@@bgcolor(#cccc99): [email protected]@\n**@@bgcolor(#a0ffa0): [email protected]@\n**@@bgcolor(#ffff99): [email protected]@\n**@@bgcolor(#c0ffff): Noble [email protected]@\n\n*State at standard temperature and pressure\n**those in @@color(red):[email protected]@ are gases\n**those in @@color(green):[email protected]@ are liquids\n**those in black are solids
I think this feature from the SecondVersion of TiddlyWiki is quite original. It's a button in the right-hand sidebar that sets the browser address bar to a URL embodying all the currently open tiddlers in the order that they are currently shown. To use it, arrange the open tiddlers that you want, click the permaview button, copy the URL from the browser address bar, and then paste it into an email, web page or whatever.
Easily toggle from Perspective to Parallel from the dashboard, or use the PERSPECTIVE system variable.
Use the Add-a-Plotter wizard to print your drawings to PDF format. Under Manufacturers, select Autodesk ePlot (PDF) and under Models, select PDF.\n\n[img[]]
You can now link to [[external sites|]] with ordinary words, without the messiness of the full URL appearing. Edit this tiddler to see how.\n\nYou can also LinkToFolders.
The GTD Tiddly Wiki has been designed to print "HipsterPDA" 3x5 index cards. All you have to do is use your browser's "Print" button or shortcut key.\n\n!Print Features:\n* Print directly to 3x5 from your browser. There is no "printer friendly" link.\n* Pagination: Each Tiddler (or GTD list) will print on it's own sheet. You could have all your lists open and print them all at once.\n* If you know any CSS, you can completely customize the print output.\n* List bullets are circles to help you mark off completed tasks in your HipsterPDA.\n\n[img[]]\n\n!How to customize print style, typeface, or font size:\n* Edit the StyleSheet Tiddler (it helps to know a little CSS).\n\n!KnownBugs with print:\n* Firefox/Mac has no "page properties" interface for removing the page URL, page numbers, etc... from printed pages. This is pretty lame. Try entering about:config in Firefox's URL bar and look for "print" to configure it the hard way.\n* WIN/IE 6 inserts one blank page because it does not recognize the :first-child CSS psuedo element.\n* You'll probably need to tweak your browser print settings to remove the page URL, pagination, timestamp, and ensure that the output is sized and paged correctly.\n* Your mileage may vary because of platform, font, browser, and printer differences. If you find something that's broken or needs help, visit the GTDTWForum.
* [[QUICKCALC—A Handy Calculator!]]\n* [[Layer Tips]]\n* [[Express MTEXT]]\n* [[Creating 2D Drawings from 3D]]
Derived from the Geometric Calculator command (CAL ), QUICKCALC can be used to\n* Perform a full range of calculations\n* Convert from one system of units to another\n* Perform more advanced functions with the Scientific panel\n* Pass values back and forth to a command or the Properties palette\n* Set variables for use across AutoCAD drawings and sessions\n\n[img[]]\n\n//''Tip:'' Quickly access the calculator by entering QC or pressing Ctrl+8.//
The AutoComplete functionality finishes your input for you. This feature comes in handy if you forget how to spell a specific system variable or infrequently used command. Key in the text you know and use the Tab key to cycle through all the possibilities.\n\nA Recent Input option appears on your shortcut menus, making it easy to recall a previously used value.\n\n[img[]]
The rules governing where a tiddler is displayed sound complicated written down. When you click on a tiddler link within another tiddler, the new one is opened immediately below the current one. If the target tiddler is already open, TiddlyWiki just uses SmoothScrolling to bring it into view. More or less the same thing happens when clicking on a tiddler link within the menu or sidebar, except that the tiddler opens at the top of the page if it is not already open.
The Rectangle command has two additional options:\n* Area option, where you define the length of one side and then total area\n* Rotate option
RegExpSearch uses JavaScript's [[RegExp syntax|]] to allow flexible searches.
If you rename a Tiddler and it lives in MainMenu or DefaultTiddlers, you'll need to update those SpecialTiddlers manually.
It’s easier than ever to create a realistic 2D image based on your 3D scene. The updated RENDER command launches right into rendering your images without you having to answer all types of technical questions. Rendering presets are tailored for quick preview renderings as well as high-quality ones.\n\nTake advantage of these advanced rendering tips:\n* For better performance use default lighting and turn off shadows.\n* Don’t go crazy with the lights! Too many could slow you down.\n* Intersecting faces don’t render as well. Use Boolean commands such as UNION and INTERSECT to correct.\n* Faces that overlap and lie in the same plane (coplanar) occasionally produce ambiguous results, especially if they use differing materials. Move the objects so the faces don’t occupy the same plane.\n* Twisted faces don’t render well. Be sure to create your faces with the corners in the proper order.\n\n[img[]]\n
It's easy to make your own TiddlyWiki that you can publish yourself - see how to SaveChanges for details. If you want to change the layout or the colour scheme, you'll need some basic HTML and CSS knowledge.
GTDTiddlyWiki will incorporate [[updates|]] from the official TiddlyWiki and other contributors as appropriate. If you'd like to contribute to development, go the GTDTWForum.\n\nTo see my changes to Javascript, search the source code for "Nathan Edit".\n\nHowToUpgrade | UpdateNotification | VersionArchive\n\n! version 1.0.6 September 3rd 2005\n# Full rebuild based on TiddlyWiki Revision 1.2.32.\n\n! version 1.0.5 May 21st 2005\n# Added version number to footer and VersionArchive (major update soon).\n\n! version 1.0.4 May 17th 2005\n# Added JeremyRuston's CustomStyleSheet feature.\n\n! version 1.0.3 May 17th 2005\n# Now works in Safari (requires [[plugin by Jonathan Paisley|]]) Thanks Jonathan! \n# Constrained printed images to fit 3x5 cards (this won't work in IE)\n# Added saving on delete and put a small "save" link back into the sidebar.\n# Added links to GTDTWForum and RSS UpdateNotification\n\n! version 1.0.2 May 13th 2005\n# When "done" button or CRTL+ENTER is pressed to make changes to a Tiddler, entire wiki is saved and a backup is created. This should prevent accidental data loss. (Thanks to Ron, Jamie, and Terminus in the [[group|]])\n# Removed "Save Successful" confirmation dialog.\n# Removed big happy "Save" button (and died a little inside) ;) to avoid user ambiguity about saving. Also removed [alt+s] save.\n# Added Camino compatability ([[Thanks Schlafer|]])\n# Added DevelopmentTips\n\n! version 1.0.1 May 10th 2005\n# Added TiddlyWiki fixes from original version 1.2.6\n\n! version 1.0.0 May 9th, 2005\n# Added print style sheet\n# Overhaul of CSS layout\n# Added alt + s quicksave with a simple accesskey attribute.\n# Changed sidebar "Timeline" and "All" to remove BR tags and extra Spaces. Check the javascript functions refreshTabTimeline() and refreshTabAll()\n# Changed incremental date stamped "backup on save" to a single backup file. See the saveChanges() javscript function in this page's source to re-enable datestamped backup.
As you move your cursor over an object, the object is highlighted, helping to ensure that you select the correct object and making it easy to distinguish entire objects from individual objects such as plines\nversus lines.\n
You can SaveChanges if you're using FireFox or InternetExplorer:\n# if you're using Windows XP you might run into ServicePack2Problems\n# right click on [[this link|#]] and select 'Save link as...' or 'Save target as...'\n** choose where to save the file, and what to call it (but keep the .HTML extension)\n# open the newly downloaded file in your browser\n# click the 'options' button to set your username\n# edit, create and delete the tiddlers you want\n** you can change the SpecialTiddlers to change the SiteTitle and MainMenu etc.\n# Every time you click "done" or "delete" when editing a Tiddler, your changes are saved and a backup of the last saved state is created (customize this in the options panel).\n
It’s easy to save back to previous releases of AutoCAD (as far back as AutoCAD® Release 14) to facilitate data exchange.
Released in December 2004, the [[second version|secondversion.html]] of TiddlyWiki grew 50% over the FirstVersion to 76KB. It added IncrementalSearch, the ReferencesButton, the PermaLinkButton, PermaView, CloseAll, SmoothScrolling, an ImprovedSidebar, an animation for the CloseButton and a tiny EasterEgg in homage to Macintosh OS X. It also introduced a new SiteDesign.
One of the neatest features of TiddlyWiki is that it is entirely self-contained in a single HTML file. It contains the actual hypertext document, and the JavaScript, CascadingStyleSheets and HTML necessary to both view and edit the document. This means that it is trivial to host a TiddlyWiki on a website, or to distribute one by email. And anyone with a reasonably recent web browser will be able to read and edit it.
"How do I run this on a server?" is the number one question people ask. \n\nThe answer is "You can't, and it's a feature, not a bug." \n\nThe idea behind TiddlyWiki is that you can update it from any device with a capable browser, whether you are connected or not. It's personal, not collaborative, though you could upload your version to your server if you wanted people to see your lists (PermaView is good for this).\n\nThe good news is that there are online versions of TiddlyWiki that you can find at [[Jeremy's site|]], and if you like the things I've done with GTDTiddlyWiki you could merge my version into other TiddlyWiki implementations.
Internet Explorer Windows XP SP2 seems to have a magical ability to keep track of html files that have been downloaded from the internet and saved on an NTFS drive. By storing additional data in an [[alternate data stream|]], it manages to keep them in the 'Internet Zone' regardless of attempts to rename or modify the file. But, in order to be able to SaveChanges, TiddlyWiki needs to run in the 'My Computer Zone'.\n\nThere are a couple of ways around the problem:\n* save the TiddlyWiki HTML file to a FAT drive (eg a USB thumb drive)\n* open the downloaded file with a text editor and save it again under a different name\n\nIn either case, The new file will open in 'My Computer Zone', which in turn causes Internet Explorer to put up it's information bar asking you whether you want to run it. You need to 'Allow blocked content' to let TiddlyWiki do it's stuff.\n\nThis is all a bit frustrating. An easy alternative is to use FireFox, which seems to do the trick on all platforms.
<<list shadowed>>
Sharing your drawing information is important, and AutoCAD 2007 software makes it even easier to do so.\n\n* [[Using DWF Files as Underlays]]\n* [[Plotting to PDF]]\n* [[External References]]\n* [[Saving to Older File Formats]]\n* [[Access to DWG Files]]\n
A simple click on Reload Modified Xrefs saves you time.\n\n[img[]]
for Using AutoCAD 2007 Software
Tips & Tricks
Creating 3D solid primitives is easy. Just follow the same steps you use with the correlating 2D commands.\n\n!!Box\nSimilar to RECTANG, dynamically add in the height. You can also use a center point to define the cube.\n\n!!Wedge\nDraw the base rectangle and the height (the sloped face is placed opposite the first corner). The cube option draws a wedge with equal sides. You can also use a center point to define the wedge.\n\n!!Cone\nThis features has the same options as the CIRCLE command to define base followed by height, which is easy to select dynamically. You can also specify an elliptical base. Define height by selecting between two points (2P), or an axis endpoint. The Top Radius option creates a cone that does not meet at a point (cone frustum).\n\n[img[]]\n\n!!Cylinder\nThis feature has the same options as Cone, but the base and the top radius are equal.\n\n!!Sphere\nThis feature has the same options you’d find in the CIRCLE command (center point, 3P, 2P, TTR), but it generates a sphere.\n\n!!Pyramid\nUse the new PYRAMID command to draw a solid pyramid (similar to the POLYGON command). You input the number of sides (3 to 32), base radius, inscribed or circumscribed (or use the Edge option), top radius, and height.\n\n[img[]]\n\n!!Torus\nThis feature has the same options as CIRCLE to define the distance from the center of the torus to the center of the tube. Use 3P or 2P to define the circumference. Then define the radius or diameter\nof the tube.\n\n!!Helix\nNow it’s easy to create helical shapes by specifying the height, base, top radii, number, and height of turns and direction (clockwise or counterclockwise).\n\n[img[]]\n\n
TiddlyWiki uses several special tiddlers to hold the text used for the MainMenu, the SiteTitle and the SiteSubtitle. DefaultTiddlers is used to store the titles of the tiddlers that are shown at startup. SaveChanges is automatically displayed if there's a problem with saving. StyleSheet is a user defined stylesheet that exists as a Tiddler. \n\nAll except StyleSheet can be edited with the changes taking effect immediately.
When it loads, TiddlyWiki looks for the names of tiddlers to open as a space-separated list after the # in the URL. If there are no tiddlers in the URL it instead loads the tiddlers named in DefaultTiddlers, one of the SpecialTiddlers.
* [[Updates to Popular Editing Commands]]\n* [[Rectangle]]\n* [[Simplified XREF Notification]]\n* [[Join Command]]\n* [[More Flexible MLINES]]\n* [[Zoom Improvements]]\n* [[FIND Command]]\n* [[IMAGEFRAME]]\n* [[Customizable Scale List]]\n* [[Fields]]\n* [[Tables]]\n* [[Model/Layout Tabs]]\n* [[Views]]
/***\n!Calendar CSS\n***/\n/*{{{*/\n.calendar{\n border-bottom: 1px solid #550000;\n}\n\n.viewer .calendar{\n width: 220px;\n}\n\n#mainMenu .calendar{\n font-size: 8px;\n cursor: pointer;\n width: 100%;\n border: 0;\n border-collapse: collapse;\n}\n\n#mainMenu .calendar .button{\n border: 0;\n}\n\n#mainMenu .calendar td{\n font-size: 8pt;\n padding: 0;\n background: #fff;\n border: 0;\n}\n\n#mainMenu .calendar a{\n margin: 0;\n color: #000;\n background: transparent;\n}\n\n#mainMenu .calendar a:hover{\n color: #000;\n background: transparent;\n}\n\n#mainMenu .calendarMonthname,\n#mainMenu .calendar .calendarMonthTitle td a{\n color: #fff;\n}\n\n#mainMenu .calendarDaysOfWeek td{\n background: #500;\n color: #fff;\n}\n\n/*}}}*/\n\n/***\n!GTD Style\n\n!Generic rules /%==================================================================== %/\n***/\n/*{{{*/\nbody {\n background: #464646 url('') repeat-x top fixed;\n color: #000;\n font: .82em/1.25em "Bitstream Vera Sans", Verdana, Helvetica, Arial, sans-serif;\n/*"Lucida Sans Unicode", "Lucida Grande","Trebuchet MS", */\n}\n/*}}}*/\n/***\n!Header rules /%====================================================================== %/\n***/\n/*{{{*/\n#contentWrapper\n{\n margin: 0 auto;\nwidth: 59em;\nposition: relative;\n}\n\n#header\n{\n color: #fff;\n padding: 1.5em 1em .6em 0;\n}\n\n#siteTitle {\n\n font-size: 2.3em;\n margin: 0;\n}\n\n#siteSubtitle {\n font-size: 1em;\n padding-left: .8em;;\n}\n\n#titleLine{\n background: transparent;\n padding: 0;\n}\n\n#titleLine a {\n color: #cf6;\n background: transparent;\n}\n/*}}}*/\n\n\n\n\n\n\n\n\n\n/***\n!Sidebar rules /%====================================================================== %/\n***/\n/*{{{*/\n#sidebar{\n left: 0;\nwidth: 18em;\n margin: .9em .9em 0 0;\n color: #000;\n background: transparent;\n}\n/*}}}*/\n/***\n!Main menu rules /%=================================================================== %/\n***/\n/*{{{*/\n#mainMenu{\n position: static;\n width: auto;\n\n background: #600;\n border-right: 3px solid #500;\npadding: 0;\n text-align: left;\n font-size: 1em;\n}\n\n#mainMenu h1{\n padding: 0;\n margin: 0;\n font-size: 1em;\n font-weight: normal;\n}\n\n#mainMenu ul{\n padding: 0;\n margin: 0;\n list-style: none;\n}\n\n#mainMenu h1 a,\n#mainMenu li a,\n#mainMenu li a.button{\n display: block;\n padding: 0 5px 0 10px;\nborder: 0;\n border-bottom: 1px solid #500;\n border-top: 1px solid #900;\nmargin: 0;\n}\n\n#mainMenu a,\n#mainMenu a.button{\n height: 22px;\nheight: 1.83em;\n line-height: 22px;\n color: #fff;\n background: #700;\nmargin-left: 1em;\n}\n\n#mainMenu a:hover,\n#mainMenu a.button:hover {\n background: #b00;\n color: #fff;\n}\n/*}}}*/\n/***\n!Sidebar options rules /%============================================================ %/\n***/\n/*{{{*/\n#sidebarOptions {\n background: #eeb;\n border-right: 3px solid #bb8;\n color: #B4C675;\n padding: .5em 0;\n}\n\n#sidebarOptions a {\n color: #700;\n margin: .2em .8em;\n padding: 0;\n border: 0;\n}\n\n#sidebarOptions a:hover, #sidebarOptions a:active {\n color: #fff;\n background: #700;\n border: 0;\n}\n\n#sidebarOptions input{\n margin: 2px 10px;\n border: 1px inset #333;\npadding: 0;\n}\n\n#sidebarOptions .sliderPanel {\n background: #fff;\n color: #000;\n padding: 5px 10px;\n font-size: .9em;\n}\n\n#sidebarOptions .sliderPanel a{\n font-weight: normal;\n margin: 0;\n}\n\n#sidebarOptions .sliderPanel a:link,#sidebarOptions .sliderPanel a:visited {\n color: #700;\n}\n\n#sidebarOptions .sliderPanel a:hover,#sidebarOptions .sliderPanel a:active {\n color: #fff;\n background: #700;\n}\n/*}}}*/\n/***\n!Sidebar tabs rules /%===================================================================== %/\n***/\n/*{{{*/\n#sidebarTabs {\n background: transparent;\n border-right: 3px solid #740;\n border-bottom: 3px solid #520;\n border: 0;\n padding: 0;\n}\n\n#contentWrapper #sidebarTabs a,\n#contentWrapper #displayArea .tabContents a{\n color: #fff;\n}\n\n#contentWrapper #sidebarTabs a:hover,\n#contentWrapper #displayArea .tabContents a:hover {\n background: #000;\n color: #fff;\n}\n\n#contentWrapper #sidebarTabs a:active,\n#contentWrapper #displayArea .tabContents a:active{\n color: #000;\n}\n\n\n\n#contentWrapper .tabSelected {\n background: #960;\n}\n\n#contentWrapper .tabUnselected{\n background: #660;\n}\n\n#contentWrapper #sidebar .tabset{\n background: #eeb;\n border-right: 3px solid #bb8;\n padding: 0 0 0 .75em;\n}\n\n#contentWrapper .tabContents{\nfont-size: .95em;\nbackground: #960;\nborder:0;\n border-right: 3px solid #740;\n border-bottom: 3px solid #520;\n padding: .75em;\n}\n\n#contentWrapper .tabContents{\n width: auto;\n}\n\n#contentWrapper #sidebarTabs .tabContents .tabset,\n#contentWrapper .tabContents .tabset{\n border: 0;\n padding: 0;\n background: transparent;\n}\n\n#contentWrapper .tabContents .tabSelected,\n#contentWrapper .tabContents .tabContents {\n background: #700;\n border: 0;\n}\n\n#contentWrapper .tabContents .tabUnselected {\n background: #440;\n}\n\n#contentWrapper .tabset a {\n color: #fff;\n padding: .2em .7em;\n margin: 0 .17em 0 0;\n height: 2em;\nposition: static;\n}\n\n#contentWrapper .tabset a:hover {\n background: #000;\n color: #fff;\n}\n\n#contentWrapper .tabset a:active {\n color: #000;\n}\n\n#contentWrapper .tabContents ul{\n margin: 0;\n padding: 0;\n list-style: none;\n}\n\n#contentWrapper .tabContents .tabContents ul{\n color: #eeb;\n}\n\n.tabContents ul a,\n.tabContents ul .button{\n color: #fff;\n display: block;\n padding: .1em 0 .1em .7em;\n background: transparent;\n border: 0;\n}\n\n.tabContents ul a:hover {\n color: #fff;\n background: #000;\n}\n/*}}}*/\n/***\n!License panel rules /%==================================================================== %/\n***/\n/*{{{*/\n#licensePanel {\n padding: 0px 1em;\n font-size: .9em;\n}\n\n#licensePanel a {\n color: #960;\n display: block;\n margin-top: .9em;\n}\n\n#licensePanel a:hover {\n color: #fff;\n background: transparent;\n}\n/*}}}*/\n/***\n!Popup rules /%================================================================= %/\n***/\n/*{{{*/\n.popup {\n font-size: .8em;\n padding: 0em;\n background: #333;\n border: 1px solid #000;\n}\n\n.popup hr {\n margin: 1px 0 0 0;\n visibility: hidden;\n}\n\n.popup li.disabled {\n color: #666;\n}\n\n.popup li a,\n.popup li a:visited{\n color: #000;\n border: .1em outset #cf6;\n background: #cf6;\n}\n\n.popup li a:hover {\nborder: .1em outset #cf6;\n background: #ef9;\n color: #000;\n}\n/*}}}*/\n/***\n!Message area rules /%================================================================= %/\n***/\n/*{{{*/\n#messageArea{\n font-size: .9em;\n padding: .4em;\n background: #FFE72F;\n border-right: .25em solid #da1;\n border-bottom: .25em solid #a80;\n\nposition: fixed;\n top: 10px;\n right: 10px;\n color: #000;\n}\n\n#contentWrapper #messageArea a{\n color: #00e;\n text-decoration: none;\n}\n\n#contentWrapper #messageArea a:hover{\n color: #00e;\n text-decoration: underline;\n background: transparent;\n}\n\n#contentWrapper #messageArea .messageToolbar a.button{\n border: 1px solid #da1;\n}\n\n#contentWrapper #messageArea .messageToolbar a.button:hover{\n color: #00e;\n text-decoration: none;\n border: 1px solid #000;\n background: #fff;\n}\n\n\n\n/*}}}*/\n/***\n!Tiddler display rules /%================================================================== %/\n***/\n/*{{{*/\n#displayArea {\n width: 39.75em;\n margin: 0 0 0 17em;\n}\n\n.tiddler {\n margin: 0 0 .9em 0;\n padding: 0 1em;\n border-right: .25em solid #aaa;\n border-bottom: .25em solid #555;\n background: #fff;\n}\n\n.title {\n font-size: 1.5em;\n font-weight: bold;\n color: #900;\n}\n\n.toolbar {\n font-size: .8em;\n padding: .5em 0;\n}\n\n.toolbar .button{\n padding: .1em .3em;\n color: #000;\n\n border: .1em outset #cf6;\n background: #cf6;\nmargin: .1em;\n}\n\n.toolbar .button:hover {\n background: #ef9;\n color: #000;\n}\n\n.toolbar .button:active {\n background: #ff0;\n}\n\n/*}}}*/\n/***\n!Viewer rules /% ------------------------------------------------------------------------------------------ %/\n***/\n/*{{{*/\n.viewer {\n line-height: 1.4em;\n font-size: 1em;\n}\n\n.viewer a:link, .viewer a:visited {\n color: #15b;\n}\n\n.viewer a:hover {\n color: #fff;\n background: #000;\n}\n\n.viewer .button{\n background: transparent;\n border-top: 1px solid #eee;\n border-left: 1px solid #eee;\n border-bottom: 1px solid #000;\n border-right: 1px solid #000;\n}\n\n.viewer .button:hover{\n background: #eee;\n color: #000;\n}\n\n.viewer .button:active{\n background: #ccc;\n border-bottom: 1px solid #eee;\n border-right: 1px solid #eee;\n border-top: 1px solid #111;\n border-left: 1px solid #111;\n}\n\n\n.viewer blockquote {\n border-left: 3px solid #777;\n margin: .3em;\n padding: .3em;\n}\n\n.viewer pre{\n background: #fefefe;\n border: 1px solid #f1f1f1;\n}\n\n.viewer pre, .viewer code{\n color: #000;\n}\n\n.viewer ul {\n padding-left: 30px;\n}\n\n.viewer ol {\n padding-left: 30px;\n}\nul{\nlist-style-type: asquare;\n}\nol{ \n list-style-type: decimal;\n}\n\nol ol{ \n list-style-type: lower-alpha;\n}\n\nol ol ol{ \n list-style-type: lower-roman;\n}\n\n.viewer ul, .viewer ol, .viewer p {\n margin: .0;\n}\n\n.viewer li {\n margin: .2em 0;\n}\n\nh1,h2,h3,h4,h5,h6 {\n color: #000;\n font-weight: bold;\n background: #eee;\n padding: 2px 10px;\n margin: 5px 0;\n}\n\n.viewer h1 {font-size: 1.3em;}\n.viewer h2 {font-size: 1.2em;}\n.viewer h3 {font-size: 1.1em;}\n.viewer h4 {font-size: 1em;}\n.viewer h5 { font-size: .9em;}\n.viewer h6 { font-size: .8em;}\n\n.viewer table {\n border: 2px solid #303030;\n font-size: 11px;\n margin: 10px 0;\n}\n\n.viewer th, .viewer thead td{\n color: #000;\n background: #eee;\n border: 1px solid #aaa;\n padding: 0 3px;\n}\n\n.viewer td {\n border: 1px solid #aaa;\n padding: 0 3px;\n}\n\n.viewer caption {\n padding: 3px;\n}\n\n.viewer hr {\n border: none;\n border-top: dotted 1px #777;\n height: 1px;\n color: #777;\n margin: 7px 0;\n}\n\n.viewer\n{\n margin: .5em 0 0 0;\n padding: .5em 0;\n border-top: 1px solid #ccc;\n}\n\n.highlight {\n color: #000;\n background: #ffe72f;\n}\n/*}}}*/\n/***\n!Editor rules /% ----------------------------------------------------------------------------------------- %/\n***/\n/*{{{*/\n.editor {\n /* font-size: .8em; */\n font-size: 1.25em;\n\n color: #402C74;\n padding: .3em 0;\n}\n\n.editor input, .editor textarea {\nfont: .82em/1.25em "Bitstream Vera Sans", Verdana, Helvetica, Arial, sans-serif;\n\n/*\nfont: 1.1em/130% "Andale Mono", "Monaco", "Lucida Console", "Courier New", monospace;\n*/\n\n margin: 0;\n border: 1px inset #333;\n padding: 2px 0;\n}\n\n.editor textarea {\n height: 42em;\n width: 100%;\n}\n\ninput:focus, textarea:focus\n{\n background: #ffe;\n border: 1px solid #000;\n}\n.footer\n{\n padding: .5em 0;\n margin: .5em 0;\n border-top: 1px solid #ddd;\n color: #555;\n text-align: center; \n}\n/*}}}*/\n/***\n!IE Display hacks /% ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~%/\n***/\n/*{{{*/\nbody{\n _text-align: center;\n}\n\n#contentWrapper\n{\n/* _width: 770px; CSS UNDERSCORE HACK FOR PROPER WIN/IE DISPLAY */\n _text-align: left; /* CSS UNDERSCORE HACK FOR PROPER WIN/IE DISPLAY */ \n}\n\n#messageArea{\n _position: absolute;\n}\n/*}}}*/
/***\n!Calendar CSS\n***/\n/*{{{*/\n.calendar{\n border-bottom: 1px solid #550000;\n}\n\n.viewer .calendar{\n width: 220px;\n}\n\n#mainMenu .calendar{\n font-size: 8px;\n cursor: pointer;\n width: 100%;\n border: 0;\n border-collapse: collapse;\n}\n\n#mainMenu .calendar .button{\n border: 0;\n}\n\n#mainMenu .calendar td{\n font-size: 8pt;\n padding: 0;\n background: #fff;\n border: 0;\n}\n\n#mainMenu .calendar a{\n margin: 0;\n color: #000;\n background: transparent;\n}\n\n#mainMenu .calendar a:hover{\n color: #000;\n background: transparent;\n}\n\n#mainMenu .calendarMonthname,\n#mainMenu .calendar .calendarMonthTitle td a{\n color: #fff;\n}\n\n#mainMenu .calendarDaysOfWeek td{\n background: #500;\n color: #fff;\n}\n\n/*}}}*/\n\n/***\n!GTD Style\n\n!Generic rules /%==================================================================== %/\n***/\n/*{{{*/\nbody {\n background: #464646 url('') repeat-x top fixed;\n color: #000;\n font: .82em/1.25em "Bitstream Vera Sans", Verdana, Helvetica, Arial, sans-serif;\n/*"Lucida Sans Unicode", "Lucida Grande","Trebuchet MS", */\n}\n/*}}}*/
/*{{{*/\n\[email protected] print {\n#mainMenu, #sidebar, #messageArea {display: none !important;}\n#displayArea {margin: 1em 1em 0em 1em;}\n\n\n/* LAYOUT ELEMENTS ========================================================== */\n*\n{\n margin: 0;\n padding: 0;\n}\n\n#contentWrapper\n{\n margin: 0;\nwidth: 100%;\nposition: static;\n}\n\nbody {\n background: #fff;\n color: #000;\n font-size: 6.2pt;\n font-family: "Lucida Grande", "Bitstream Vera Sans", Helvetica, Verdana, Arial, sans-serif;\n}\n\nimg {\n max-width: 2.2in;\n max-height: 4.3in;\n}\n\n#header, #side_container, #storeArea, #copyright, #floater, #messageArea, .save_accesskey, .site_description, #saveTest, .toolbar, .footer\n{\n display: none;\n}\n\n#tiddlerDisplay, #displayArea\n{\n display: inline;\n}\n\n.tiddler {\n margin: 0 0 2em 0;\n border-top: 1px solid #000;\n page-break-before: always;\n}\n\n.tiddler:first-child {\n page-break-before: avoid;\n}\n\n.IEFirstChild{\n page-break-before: auto;\n}\n\n.title {\n font-size: 1.6em;\n font-weight: bold;\n margin-bottom: .3em;\n padding: .2em 0;\n border-bottom: 1px dotted #000;\n}\n\np, blockquote, ul, li, ol, dt, dd, dl, table\n{\n margin: 0 0 .3em 0;\n}\n\nh1, h2, h3, h4, h5, h6\n{\n margin: .2em 0;\n} \n\nh1\n{\n font-size: 1.5em;\n}\n\nh2\n{\n font-size: 1.3em;\n}\n\nh3\n{\n font-size: 1.25em;\n}\n\nh4\n{\n font-size: 1.15em;\n}\n\nh5\n{\n font-size: 1.1em;\n}\n\nblockquote\n{\n margin: .6em;\n padding-left: .6em;\n border-left: 1px solid #ccc;\n}\n\nul\n{\n list-style-type: circle;\n}\n\nli\n{\n margin: .1em 0 .1em 2em;\n line-height: 1.4em; \n}\n\ntable\n{\n border-collapse: collapse;\n font-size: 1em;\n}\n\ntd, th\n{\n border: 1px solid #999;\n padding: .2em;\n}\n\nhr {\n border: none;\n border-top: dotted 1px #777;\n height: 1px;\n color: #777;\n margin: .6em 0;\n}\n}\n/*}}}*/
!Supported\n* Safari (requires [[plugin by Jonathan Paisley|]])\n* Firefox\n* Win IE 6 (caveat: see KnownBugs)\n* Camino (I haven't verified this)\n\n!Unsupported\n* ==Safari: Saving doesn't work in Safari, which renders TiddlyWiki useless.== FIXED! Thanks to [[Jonathan Paisley|]].\n* Opera: I've gotten mixed reports.
!!Polysolid\nDraw a polysolid the same way you draw a polyline, but include a height and width (like walls). You can also convert an existing line, pline, arc, or circle into a swept solid.\n\n!!Extrude\nExtruding an open object creates a surface, closed object, or solid. To create a solid from a profile using lines or arcs, use the Join option of the PEDIT command first to convert them to a single pline (you could also convert the objects to a region before you extrude).\n\nUse the following extrusion profile options:\n* //Path:// Specify an object as the for the path. The path is moved to the centroid of the object and used as the profile.\n* //Direction:// Select the length and direction\nwith two points.\n* //Taper Angle:// Positive angles taper in from the base; negative angles taper out (0 is perpendicular).\n\n//''Tip:'' You can also extrude an existing face (use Ctrl to select).//\n\n//''Extra Cool Tip:'' Press Ctrl+Alt inside a boundary (open or closed) to extrude! You don’t even have to enter a command to perform this extra cool tip.//\n\n!!Sweep\nSweep an open or closed profile along an open or closed 2D or 3D path. A closed curve results in a solid. The profile is moved and aligned perpendicular to the path—no need to align it yourself anymore. The result is in the shape of the profile (the swept object).\n\nYou can also twist or scale the objects as they are swept.\n\n//''Tip:'' Use a helix as a path to create a variety of helical shapes.//\n\n[img[]]\n\n!!Loft\nDraw a 3D solid or surface through a set of two or more cross sections. Lofting through a set of closed cross sections results in a solid.\n\nMany options are available for getting the perfect loft: guide angles, drafting angles, smooth fit, and more.\n\n[img[]]\n\n!!Revolve\nThe updated REVOLVE command can create surfaces or solids based on the profile and axis of rotation.\n\n# Select the objects to revolve.\n# Specify the start and endpoint of the axis of revolution.\n# Specify the angle of revolution.\n
The table formula function has been updated to recognize a comma as a period.
Super-duper thanks to JeremyRuston for creating such a great Open Source project.\n \nThanks to Merlin Mann of 43Folders for his work evangelizing and expanding GTD and other life hacks.\n \nThanks to David Allen and Davidco. for coming up with such an elegant and powerful system for dealing with modern life.\n\nFinally, thanks to everyone who made comments and reported bugs.\n\nJeremy's original thank you follows:\n----\nThank you to everybody who has helped me with support and suggestions for TiddlyWiki, but especially IsaoSonobe for his cunning regular expression code, and to my friend RebeccaWelby for the SiteDesign.
This is the ThirdVersion of TiddlyWiki, released in April 2005. The SecondVersion was released in December 2004, and before that the FirstVersion in September 2004.\n\nSee the RevisionHistory for details of minor changes and bug-fixes since the ThirdVersion.
Please feel free to modify this document according your own usage. Let me know if you have some cool new ideas!
A TiddlyWiki is like a blog because it's divided up into neat little chunks, but it encourages you to read it by hyperlinking rather than sequentially: if you like, a non-linear blog analogue that binds the individual microcontent items into a cohesive whole. I think that TiddlyWiki represents a novel medium for writing, and will promote it's own distinctive WritingStyle. This is the ThirdVersion of TiddlyWiki, which adds several NewFeatures. There are also several TiddlyWikiAdaptations by other developers based on earlier versions.\n\nThe original TiddlyWiki is [[here|]].
The first and original was [[PhpTiddlyWiki|]] from PatrickCurry and GabrielJeffrey that adds a simple ServerSide in PHP with MySQL. Patrick's site allows anyone to create and edit tiddlers, and has become the de facto community site around TiddlyWiki.\n\nSome of the other adaptations include:\n* HenrikAastedSorensen's at\n* IsaoSonobe's OgreKitWiki at \n* JacquesTurbé's TidliPo, in French at\n* ChristianHauck's at\n* TonyLownds's at\n* PoulStaugaard and IvanMetalnikov's at\n\n* There's also KevemBuangga's TiddlyWikiClone at (caution: on Safari, it seems to get locked up with error alerts)
TiddlyWiki has been used as the basis of a couple of experiments in hypertext fiction. GinaTrapani created [[Baby Dog Sitter|]] with the FirstVersion of TiddlyWiki, followed by "[[Die, Vampire! Die!|]]" from DavidVanWert.
IsaoSonobe's TiddlyWikiPod is a nifty utility for Mac OS X that copies the content of a TiddlyWiki to an iPod where it can be read, and links followed, using the touch wheel. Isao has also added the ability to link to songs from the TiddlyWiki text which enables some interesting applications. At the moment, it only works with the older SecondVersion of TiddlyWiki. It can be found at
A row of ToolbarButtons appears to the right of a tiddler title when the mouse is hovered over it. The buttons are:\n* ''close'' - close the current tiddler\n* ''edit'' - edit the current tiddler\n* ''permalink'' - puts a link direct to the current tiddler into the address bar\n* ''references'' - displays all the tiddlers that link to the current tiddler\n* ''done'' - save all changes and create a backup\n* ''cancel'' - cancel changes to a tiddler being edited\n* ''delete'' - delete the current tiddler
Tuan-Anh works for Autodesk as a product designer in Plant Solutions group. Email: [email protected]\n\n
Supscribe to the GTDTW RSS newfeed at to be notified of official releases.
!!Undo Options\n* Undo options have been added to Copy, Offset, Fillet, Chamfer, Trim, and Extend. \n\n!!Fillet and Chamfer \n* If you just want to trim corners, use the Shift key to force a zero radius or distance, which is quite handy! Select the first object, and then hold down the Shift key to select the second object. It doesn’t reset the fillet radius!\n\n!!Trim and Extend \n* Select All defaults to select all visible objects as cutting/boundary edges.\n* Crossing/Fence options added as object selection options for the objects to trim/extend.\n* Erase Option in Trim so you can also erase those extra objects along the way.\n\n!!Stretch Command\n* Now supports multiple crossing windows and standard object selection.\n* Only those objects selected with a crossing window or crossing polygon are physically stretched. All other objects are moved.\n\n!!Offset\n* Erase the source object.\n* Specify whether the new object is created on the current layer or the same layer as the source object.\n* New Multiple option lets you continue offsetting a specific distance—no need to reselect a source object.\n\n!!Rotate and Scale\n* Copy option allows you to create a copy while you rotate or scale an object.\n* The last rotation angle or scale value is available as a default.\n* Pick any two points to specify a new angle or scale. You are no longer limited to using the base point as one of the reference points.
| !date | !user | !location | !storeUrl | !uploadDir | !toFilename | !backupdir | !origin |\n| 5/4/2006 22:41:31 | BidiX | [[gtd_tiddlywiki.htm|file:///P:/TiddlyWiki/TiddlyHost/Bruno/gtd_tiddlywiki.htm]] | [[store.php| http:/]] | | gtd_tiddlywiki.htm | backup |\n| 3/10/2006 23:7:58 | ClintChecketts | [[gtd_tiddlywiki.htm|]] | [[store.php|store.php]] | | gtd_tiddlywiki.htm | |\n| 5/10/2006 11:23:2 | YourName | [[TuanAnh's%20Notes.htm|file:///C:/Documents%20and%20Settings/tuan-at/Desktop/TuanAnh's%20Notes.htm]] | [[store.php|store.php]] | | TuanAnh's%20Notes.htm | |\n| 1/12/2006 17:0:0 | YourName | [[Tips%20&%20Tricks%20Wiki.htm|file:///C:/Documents%20and%20Settings/tuan-at/Desktop/Tips%20&%20Tricks%20Wiki.htm]] | [[store.php|store.php]] | | Tips%20&%20Tricks%20Wiki.htm | |
!Options used by UploadPlugin\nUsername: <<option txtUploadUserName>>\nPassword: <<option pasUploadPassword>>\n\nUrl of the [[store.php]] script^^(1)^^: <<option txtUploadStoreUrl 50>>\nRelative Directory to store the file^^(2)^^: <<option txtUploadDir 50>>\nFilename of the uploaded file^^(3)^^: <<option txtUploadFilename 40>>\nDirectory to backup file on webserver^^(4)^^: <<option txtUploadBackupDir>>\n\n^^(1)^^Mandatory either in UploadOptions or in MacroParameter\n^^(2)^^If empty stores in the [[store.php]] directory\n^^(3)^^If empty takes the actual filename\n^^(4)^^If empty existing the file with same name on webserver will be overwriten\n\n!Upload\n{{{<<upload [[UploadStoreUrl]}}}^^(1)^^{{{ [UploadFilename] [UploadBackupDir]]>>}}}\n\n<<upload>>
/***\n<<tiddler UploadPluginDoc>>\n!Code\n***/\n//{{{\nversion.extensions.UploadPlugin = {\n major: 3, minor: 3, revision: 1, \n date: new Date(2006,3,30),\n type: 'macro',\n source: '',\n docs: ''\n};\n//}}}\n\n////+++!![config.lib.file]\n\n//{{{\nif (!config.lib) config.lib = {};\nif (!config.lib.file) config.lib.file= {\n author: 'BidiX',\n version: {major: 0, minor: 1, revision: 0}, \n date: new Date(2006,3,9)\n};\nconfig.lib.file.dirname = function (filePath) {\n var lastpos;\n if ((lastpos = filePath.lastIndexOf("/")) != -1) {\n return filePath.substring(0, lastpos);\n } else {\n return filePath.substring(0, filePath.lastIndexOf("\s\s"));\n }\n};\nconfig.lib.file.basename = function (filePath) {\n var lastpos;\n if ((lastpos = filePath.lastIndexOf("#")) != -1) \n filePath = filePath.substring(0, lastpos);\n if ((lastpos = filePath.lastIndexOf("/")) != -1) {\n return filePath.substring(lastpos + 1);\n } else\n return filePath.substring(filePath.lastIndexOf("\s\s")+1);\n};\nwindow.basename = function() {return "@@[email protected]@";};\n//}}}\n////===\n\n////+++!![config.lib.log]\n\n//{{{\nif (!config.lib) config.lib = {};\nif (!config.lib.log) config.lib.log= {\n author: 'BidiX',\n version: {major: 0, minor: 1, revision: 0}, \n date: new Date(2006,3,9)\n};\nconfig.lib.Log = function(tiddlerTitle, logHeader) {\n if (version.major < 2)\n this.tiddler = store.tiddlers[tiddlerTitle];\n else\n this.tiddler = store.getTiddler(tiddlerTitle);\n if (!this.tiddler) {\n this.tiddler = new Tiddler();\n this.tiddler.title = tiddlerTitle;\n this.tiddler.text = "| !date | !user | !location |" + logHeader;\n this.tiddler.created = new Date();\n this.tiddler.modifier = config.options.txtUserName;\n this.tiddler.modified = new Date();\n if (version.major < 2)\n store.tiddlers[tiddlerTitle] = this.tiddler;\n else\n store.addTiddler(this.tiddler);\n }\n return this;\n};\n\nconfig.lib.Log.prototype.newLine = function (line) {\n var now = new Date();\n var newText = "| ";\n newText += now.getDate()+"/"+(now.getMonth()+1)+"/"+now.getFullYear() + " ";\n newText += now.getHours()+":"+now.getMinutes()+":"+now.getSeconds()+" | ";\n newText += config.options.txtUserName + " | ";\n var location = document.location.toString();\n var filename = config.lib.file.basename(location);\n if (!filename) filename = '/';\n newText += "[["+filename+"|"+location + "]] |";\n this.tiddler.text = this.tiddler.text + "\sn" + newText;\n this.addToLine(line);\n};\n\nconfig.lib.Log.prototype.addToLine = function (text) {\n this.tiddler.text = this.tiddler.text + text;\n this.tiddler.modifier = config.options.txtUserName;\n this.tiddler.modified = new Date();\n if (version.major < 2)\n store.tiddlers[this.tiddler.tittle] = this.tiddler;\n else {\n store.addTiddler(this.tiddler);\n story.refreshTiddler(this.tiddler.title);\n store.notify(this.tiddler.title, true);\n }\n if (version.major < 2)\n store.notifyAll(); \n};\n//}}}\n////===\n\n////+++!![config.lib.options]\n\n//{{{\nif (!config.lib) config.lib = {};\nif (!config.lib.options) config.lib.options = {\n author: 'BidiX',\n version: {major: 0, minor: 1, revision: 0}, \n date: new Date(2006,3,9)\n};\n\nconfig.lib.options.init = function (name, defaultValue) {\n if (!config.options[name]) {\n config.options[name] = defaultValue;\n saveOptionCookie(name);\n }\n};\n//}}}\n////===\n\n////+++!![PasswordTweak]\n\n//{{{\nversion.extensions.PasswordTweak = {\n major: 1, minor: 0, revision: 2, date: new Date(2006,3,11),\n type: 'tweak',\n source: ''\n};\n//}}}\n/***\n!!config.macros.option\n***/\n//{{{\nconfig.macros.option.passwordCheckboxLabel = "Save this password on this computer";\nconfig.macros.option.passwordType = "password"; // password | text\n\nconfig.macros.option.onChangeOption = function(e)\n{\n var opt = this.getAttribute("option");\n var elementType,valueField;\n if(opt) {\n switch(opt.substr(0,3)) {\n case "txt":\n elementType = "input";\n valueField = "value";\n break;\n case "pas":\n elementType = "input";\n valueField = "value";\n break;\n case "chk":\n elementType = "input";\n valueField = "checked";\n break;\n }\n config.options[opt] = this[valueField];\n saveOptionCookie(opt);\n var nodes = document.getElementsByTagName(elementType);\n for(var t=0; t<nodes.length; t++) {\n var optNode = nodes[t].getAttribute("option");\n if (opt == optNode) \n nodes[t][valueField] = this[valueField];\n }\n }\n return(true);\n};\n\nconfig.macros.option.handler = function(place,macroName,params)\n{\n var opt = params[0];\n var size = 15;\n if (params[1])\n size = params[1];\n if(config.options[opt] === undefined) {\n return;}\n var c;\n switch(opt.substr(0,3)) {\n case "txt":\n c = document.createElement("input");\n c.onkeyup = this.onChangeOption;\n c.setAttribute ("option",opt);\n c.size = size;\n c.value = config.options[opt];\n place.appendChild(c);\n break;\n case "pas":\n // input password\n c = document.createElement ("input");\n c.setAttribute("type",config.macros.option.passwordType);\n c.onkeyup = this.onChangeOption;\n c.setAttribute("option",opt);\n c.size = size;\n c.value = config.options[opt];\n place.appendChild(c);\n // checkbox link with this password "save this password on this computer"\n c = document.createElement("input");\n c.setAttribute("type","checkbox");\n c.onclick = this.onChangeOption;\n c.setAttribute("option","chk"+opt);\n place.appendChild(c);\n c.checked = config.options["chk"+opt];\n // text savePasswordCheckboxLabel\n place.appendChild(document.createTextNode(config.macros.option.passwordCheckboxLabel));\n break;\n case "chk":\n c = document.createElement("input");\n c.setAttribute("type","checkbox");\n c.onclick = this.onChangeOption;\n c.setAttribute("option",opt);\n place.appendChild(c);\n c.checked = config.options[opt];\n break;\n }\n};\n//}}}\n/***\n!! Option cookie stuff\n***/\n//{{{\nwindow.loadOptionsCookie_orig_PasswordTweak = window.loadOptionsCookie;\nwindow.loadOptionsCookie = function()\n{\n var cookies = document.cookie.split(";");\n for(var c=0; c<cookies.length; c++) {\n var p = cookies[c].indexOf("=");\n if(p != -1) {\n var name = cookies[c].substr(0,p).trim();\n var value = cookies[c].substr(p+1).trim();\n switch(name.substr(0,3)) {\n case "txt":\n config.options[name] = unescape(value);\n break;\n case "pas":\n config.options[name] = unescape(value);\n break;\n case "chk":\n config.options[name] = value == "true";\n break;\n }\n }\n }\n};\n\nwindow.saveOptionCookie_orig_PasswordTweak = window.saveOptionCookie;\nwindow.saveOptionCookie = function(name)\n{\n var c = name + "=";\n switch(name.substr(0,3)) {\n case "txt":\n c += escape(config.options[name].toString());\n break;\n case "chk":\n c += config.options[name] ? "true" : "false";\n // is there an option link with this chk ?\n if (config.options[name.substr(3)]) {\n saveOptionCookie(name.substr(3));\n }\n break;\n case "pas":\n if (config.options["chk"+name]) {\n c += escape(config.options[name].toString());\n } else {\n c += "";\n }\n break;\n }\n c += "; expires=Fri, 1 Jan 2038 12:00:00 UTC; path=/";\n document.cookie = c;\n};\n//}}}\n/***\n!! Initializations\n***/\n//{{{\n// define config.options.pasPassword\nif (!config.options.pasPassword) {\n config.options.pasPassword = 'defaultPassword';\n window.saveOptionCookie('pasPassword');\n}\n// since loadCookies is first called befor password definition\n// we need to reload cookies\nwindow.loadOptionsCookie();\n//}}}\n////===\n\n////+++!![config.macros.upload]\n\n//{{{\nconfig.macros.upload = {\n accessKey: "U",\n formName: "UploadPlugin",\n contentType: "text/html;charset=UTF-8",\n defaultStoreScript: "store.php"\n};\n\n// only this two configs need to be translated\nconfig.macros.upload.messages = {\n aboutToUpload: "About to upload TiddlyWiki to %0",\n errorDownloading: "Error downloading",\n errorUploadingContent: "Error uploading content",\n fileNotFound: "file to upload not found",\n fileNotUploaded: "File %0 NOT uploaded",\n mainFileUploaded: "Main TiddlyWiki file uploaded to %0",\n urlParamMissing: "url param missing",\n rssFileNotUploaded: "RssFile %0 NOT uploaded",\n rssFileUploaded: "Rss File uploaded to %0"\n};\n\nconfig.macros.upload.label = {\n promptOption: "Save and Upload this TiddlyWiki with UploadOptions",\n promptParamMacro: "Save and Upload this TiddlyWiki in %0",\n saveLabel: "save to web", \n saveToDisk: "save to disk",\n uploadLabel: "upload" \n};\n\nconfig.macros.upload.handler = function(place,macroName,params){\n // parameters initialization\n var storeUrl = params[0];\n var toFilename = params[1];\n var backupDir = params[2];\n var uploadDir = params[3];\n var username = params[4];\n var password; // for security reason no password as macro parameter\n var label;\n if (document.location.toString().substr(0,4) == "http")\n label = this.label.saveLabel;\n else\n label = this.label.uploadLabel;\n var prompt;\n if (storeUrl) {\n prompt = this.label.promptParamMacro.toString().format([this.dirname(storeUrl)]);\n }\n else {\n prompt = this.label.promptOption;\n }\n createTiddlyButton(place, label, prompt, \n function () {\n config.macros.upload.upload(storeUrl, toFilename, uploadDir, backupDir, username, password); \n return false;}, \n null, null, this.accessKey);\n};\nconfig.macros.upload.UploadLog = function() {\n return new config.lib.Log('UploadLog', " !storeUrl | !uploadDir | !toFilename | !backupdir | !origin |" );\n};\nconfig.macros.upload.UploadLog.prototype = config.lib.Log.prototype;\nconfig.macros.upload.UploadLog.prototype.startUpload = function(storeUrl, toFilename, uploadDir, backupDir) {\n var line = " [[" + config.lib.file.basename(storeUrl) + "|" + storeUrl + "]] | ";\n line += uploadDir + " | " + toFilename + " | " + backupDir + " |";\n this.newLine(line);\n};\nconfig.macros.upload.UploadLog.prototype.endUpload = function() {\n this.addToLine(" Ok |");\n};\nconfig.macros.upload.basename = config.lib.file.basename;\nconfig.macros.upload.dirname = config.lib.file.dirname;\nconfig.macros.upload.upload = function(storeUrl, toFilename, uploadDir, backupDir, username, password)\n{\n // parameters initialization\n storeUrl = (storeUrl ? storeUrl : config.options.txtUploadStoreUrl);\n toFilename = (toFilename ? toFilename : config.options.txtUploadFilename);\n if (toFilename === '') {\n toFilename = config.lib.file.basename(document.location.toString());\n }\n backupDir = (backupDir ? backupDir : config.options.txtUploadBackupDir);\n uploadDir = (uploadDir ? uploadDir : config.options.txtUploadDir);\n username = (username ? username : config.options.txtUploadUserName);\n password = config.options.pasUploadPassword; // for security reason no password as macro parameter\n\n clearMessage();\n // only for forcing the message to display\n if (version.major < 2)\n store.notifyAll();\n if (!storeUrl) {\n alert(config.macros.upload.messages.urlParamMissing);\n return;\n }\n \n var log = new this.UploadLog();\n log.startUpload(storeUrl, toFilename, uploadDir, backupDir);\n if (document.location.toString().substr(0,5) == "file:") {\n saveChanges();\n }\n displayMessage(config.macros.upload.messages.aboutToUpload.format([this.dirname(storeUrl)]), this.dirname(storeUrl));\n this.uploadChanges(storeUrl, toFilename, uploadDir, backupDir, username, password);\n if(config.options.chkGenerateAnRssFeed) {\n //var rssContent = convertUnicodeToUTF8(generateRss());\n var rssContent = generateRss();\n var rssPath = toFilename.substr(0,toFilename.lastIndexOf(".")) + ".xml";\n this.uploadContent(rssContent, storeUrl, rssPath, uploadDir, '', username, password, \n function (responseText) {\n if (responseText.substring(0,1) != '0') {\n displayMessage(config.macros.upload.messages.rssFileNotUploaded.format([rssPath]));\n }\n else {\n if (uploadDir) {\n rssPath = uploadDir + "/" + config.macros.upload.basename(rssPath);\n } else {\n rssPath = config.macros.upload.basename(rssPath);\n }\n displayMessage(config.macros.upload.messages.rssFileUploaded.format(\n [config.macros.upload.dirname(storeUrl)+"/"+rssPath]), config.macros.upload.dirname(storeUrl)+"/"+rssPath);\n }\n // for debugging store.php uncomment last line\n //DEBUG alert(responseText);\n });\n }\n return;\n};\n\nconfig.macros.upload.uploadChanges = function(storeUrl, toFilename, uploadDir, backupDir, \n username, password) {\n var original;\n if (document.location.toString().substr(0,4) == "http") {\n original =, toFilename, uploadDir, backupDir, username, password);\n return;\n }\n else {\n // standard way : Local file\n \n original = loadFile(getLocalPath(document.location.toString()));\n if(window.Components) {\n // it's a mozilla browser\n try {\n"UniversalXPConnect");\n var converter = Components.classes[""]\n .createInstance(Components.interfaces.nsIScriptableUnicodeConverter);\n converter.charset = "UTF-8";\n original = converter.ConvertToUnicode(original);\n }\n catch(e) {\n }\n }\n }\n //DEBUG alert(original);\n this.uploadChangesFrom(original, storeUrl, toFilename, uploadDir, backupDir, \n username, password);\n};\n\nconfig.macros.upload.uploadChangesFrom = function(original, storeUrl, toFilename, uploadDir, backupDir, \n username, password) {\n var startSaveArea = '<div id="' + 'storeArea">'; // Split up into two so that indexOf() of this source doesn't find it\n var endSaveArea = '</d' + 'iv>';\n // Locate the storeArea div's\n var posOpeningDiv = original.indexOf(startSaveArea);\n var posClosingDiv = original.lastIndexOf(endSaveArea);\n if((posOpeningDiv == -1) || (posClosingDiv == -1))\n {\n alert(config.messages.invalidFileError.format([document.location.toString()]));\n return;\n }\n var revised = original.substr(0,posOpeningDiv + startSaveArea.length) + \n allTiddlersAsHtml() + "\sn\st\st" +\n original.substr(posClosingDiv);\n var newSiteTitle;\n if(version.major < 2){\n newSiteTitle = (getElementText("siteTitle") + " - " + getElementText("siteSubtitle")).htmlEncode();\n } else {\n newSiteTitle = (wikifyPlain ("SiteTitle") + " - " + wikifyPlain ("SiteSubtitle")).htmlEncode();\n }\n revised = revised.replace(new RegExp("<title>[^<]*</title>", "im"),"<title>"+ newSiteTitle +"</title>");\n var response = this.uploadContent(revised, storeUrl, toFilename, uploadDir, backupDir, \n username, password, function (responseText) {\n if (responseText.substring(0,1) != '0') {\n alert(responseText);\n displayMessage(config.macros.upload.messages.fileNotUploaded.format([getLocalPath(document.location.toString())]));\n }\n else {\n if (uploadDir !== '') {\n toFilename = uploadDir + "/" + config.macros.upload.basename(toFilename);\n } else {\n toFilename = config.macros.upload.basename(toFilename);\n }\n displayMessage(config.macros.upload.messages.mainFileUploaded.format(\n [config.macros.upload.dirname(storeUrl)+"/"+toFilename]), config.macros.upload.dirname(storeUrl)+"/"+toFilename);\n var log = new config.macros.upload.UploadLog();\n log.endUpload();\n store.setDirty(false);\n }\n // for debugging store.php uncomment last line\n //DEBUG alert(responseText);\n }\n );\n};\n\nconfig.macros.upload.uploadContent = function(content, storeUrl, toFilename, uploadDir, backupDir, \n username, password, callbackFn) {\n var boundary = "---------------------------"+"AaB03x"; \n var request;\n try {\n request = new XMLHttpRequest();\n } \n catch (e) { \n request = new ActiveXObject("Msxml2.XMLHTTP"); \n }\n if (window.netscape){\n try {\n if (document.location.toString().substr(0,4) != "http") {\n'UniversalBrowserRead');}\n }\n catch (e) { }\n } \n //DEBUG alert("user["+config.options.txtUploadUserName+"] password[" + config.options.pasUploadPassword + "]");\n // compose headers data\n var sheader = "\sr\sn";\n sheader += "--" + boundary + "\sr\snContent-disposition: form-data;name=\s"";\n sheader += config.macros.upload.formName +"\s"\sr\sn\sr\sn";\n sheader += "backupDir="+backupDir\n +";user=" + username \n +";password=" + password\n +";uploaddir=" + uploadDir\n + ";;\sr\sn"; \n sheader += "\sr\sn" + "--" + boundary + "\sr\sn";\n sheader += "Content-disposition: form-data;name=\s"userfile\s";filename=\s""+toFilename+"\s"\sr\sn";\n sheader += "Content-Type: " + config.macros.upload.contentType + "\sr\sn";\n sheader += "Content-Length: " + content.length + "\sr\sn\sr\sn";\n // compose trailer data\n var strailer = new String();\n strailer = "\sr\sn--" + boundary + "--\sr\sn";\n var data;\n data = sheader + content + strailer;\n //"POST", storeUrl, true, username, password);\n"POST", storeUrl, true);\n request.onreadystatechange = function () {\n if (request.readyState == 4) {\n if (request.status == 200)\n callbackFn(request.responseText);\n else\n alert(config.macros.upload.messages.errorUploadingContent);\n }\n };\n request.setRequestHeader("Content-Length",data.length);\n request.setRequestHeader("Content-Type","multipart/form-data; boundary="+boundary);\n request.send(data); \n};\n\n\ = function(uploadUrl, uploadToFilename, uploadDir, uploadBackupDir, \n username, password) {\n var request;\n try {\n request = new XMLHttpRequest();\n } \n catch (e) { \n request = new ActiveXObject("Msxml2.XMLHTTP"); \n }\n try {\n if (uploadUrl.substr(0,4) == "http") {\n"UniversalBrowserRead");\n }\n else {\n"UniversalXPConnect");\n }\n } catch (e) { }\n //"GET", document.location.toString(), true, username, password);\n"GET", document.location.toString(), true);\n request.onreadystatechange = function () {\n if (request.readyState == 4) {\n if(request.status == 200) {\n config.macros.upload.uploadChangesFrom(request.responseText, uploadUrl, \n uploadToFilename, uploadDir, uploadBackupDir, username, password);\n }\n else\n alert(config.macros.upload.messages.errorDownloading.format(\n [document.location.toString()]));\n }\n };\n request.send(null);\n};\n\n//}}}\n////===\n\n////+++!![Initializations]\n\n//{{{\nconfig.lib.options.init('txtUploadStoreUrl','store.php');\nconfig.lib.options.init('txtUploadFilename','');\nconfig.lib.options.init('txtUploadDir','');\nconfig.lib.options.init('txtUploadBackupDir','');\nconfig.lib.options.init('txtUploadUserName',config.options.txtUserName);\nconfig.lib.options.init('pasUploadPassword','');\nconfig.shadowTiddlers.UploadPluginDoc = "[[Full Documentation| ]]\sn"; \n\n\n//}}}\n////===\n\n////+++!![Core Hijacking]\n\n//{{{\nconfig.macros.saveChanges.label_orig_UploadPlugin = config.macros.saveChanges.label;\nconfig.macros.saveChanges.label = config.macros.upload.label.saveToDisk;\n//}}}\n////===
* [[Dynamic Input]]\n* [[Clean Screen]]\n* [[Quick Command and Recent Data Access]]\n* [[Rollover Object Selection Features]]\n* [[Distinguishable Windows]]\n* [[Controlling Toolbar and Tool Palette Placement]]\n* [[My UI tips]]
The new DWFATTACH command enables you to use a DWFTM file as an underlay (similar to raster images). The DWF file is linked and not physically embedded into the drawing file, thus keeping the file size down.\n\nYou can snap to attached DWF files, and all layers from the DWF file are flattened into a single layer. The physical underlay is placed on the current layer. Use the DWFADJUST command to make display adjustments:\n* //Fade:// The greater the value (0 to 80) the lighter the linework. A high contrast value can also blend the underlay into the background.\n* //Contrast:// The greater the value (0 to 100), the more each pixel is forced to its primary or secondary color.\n* //Monochrome:// Controls the color saturation of all linework.\n\n[img[]]
Within the main story column you can click on bold links to read a linked tiddler. Click on italic links to create a new tiddler. When you hover the mouse over a tiddler several ToolbarButtons appear. You can edit the text of any tiddler by double-clicking on it (or selecting 'edit' from the toolbar), but your changes won't get saved permanently until you make your own copy of TiddlyWiki, as described in SaveChanges.
Right click and "save as" the following links:\n[[1.0.4|/gtdtw-archive/gtdtw1.0.4.html]]\n[[1.0.3|/gtdtw-archive/gtdtw1.0.3.html]]\n[[1.0.2|/gtdtw-archive/gtdtw1.0.2.html]]\n[[1.0.1|/gtdtw-archive/gtdtw1.0.1.html]]\n[[1.0.0|/gtdtw-archive/gtdtw1.0.0.html]]
<div class='toolbar' macro='toolbar -closeTiddler closeOthers +editTiddler permalink references jump'></div>\n<div class='title' macro='view title'></div>\n<div class='subtitle'>by <span macro='view modifier link'></span>, <span macro='view modified date [[DD MMM YYYY]]'></span> (created <span macro='view created date [[DD MMM YYYY]]'></span>)</div>\n<div class='viewer' macro='view text wikified'></div>\n<div class='footer' macro='tags'></div>
By default, layer visibility is stored with named views. Use the View Manager, and select Update Layers to update the named view to use the current layer settings.\n\n//''Tip:'' Named views are a speedy means of restoring a viewpoint and layers, as well as other properties such as section planes. They are available for quick access from the dashboard.//
Use Visual Styles to quickly change the display of edges and shading in a viewport. Create your own Visual Styles in the Visual Style Manager.\n* 2D Wireframe: Displays objects using lines and curves to represent boundaries with model space colors.\n* 3D Wireframe: Displays objects using lines and curves with a 3D look and feel. 2D objects such as raster images, OLE objects, linetypes, and lineweights are not visible.\n* 3D Hidden: Wireframe representation, hidden lines removed.\n* Realistic: Shades the objects and smoothes the edges. Materials are displayed.\n* Conceptual: Shades the objects and smoothes the edges using the Gooch face style. Objects are outlined. Less realistic but easier to see.\n\n\n[img[]]
* [[Lighting]]\n* [[Applying Materials]]\n* [[Rendering]]
Use 3DWALK to walk through your design using the four arrow keys. Alternatively, use W, forward; A, left; S, back; D, right. Drag the mouse in the direction you want to look. Perspective mode must be on.\n\n//''Tip:'' Use the mouse wheel to roll in a walkthrough and the left mouse button to swivel to a new direction.//\n\nAdjust the step size and speed in the Navigation control panel.\n\n//''Tip:'' You can also create an animation of your walk-through (ANIPATH command).//
Putting TiddlyWiki on a USB thumb drive lets you carry around a SelfContained notebook that you can update wherever there's a reasonably modern computer, whether it's a Mac, Linux or a PC. (To be even more independent you can [[install FireFox on the drive|]] as well).
A Wiki is a popular way of building collaborative websites. It's based on the ideas of easy editing of pages and the use of special WikiWord notation to automagically create links between pages. See Wikipedia for [[more details|]]. TiddlyWiki is different from a conventional Wiki because it is not based on entire pages of content, but rather items of MicroContent that are referred to as 'tiddlers'.
A WikiWord is a word composed of a bunch of other words slammed together with each of their first letters capitalised. WikiWord notation in a conventional WikiWikiWeb is used to name individual pages while TiddlyWiki uses WikiWord titles for smaller chunks of MicroContent. Referring to a page with a WikiWord automatically creates a link to it. Clicking on a link jumps to that page or, if it doesn't exist, to an editor to create it. This ThirdVersion of TiddlyWiki also adds NonWikiWordLinks.
Workspaces control the display of toolbars, menus, all tool and command palettes, and the command line. You can store workspaces for the different ways you choose to work. For example, your 3D workspace would be very different from your 2D workspace.\n\n[img[]]
I'm hoping that after using TiddlyWiki for a while a new WritingStyle will emerge that is appropriate for this medium. Jakob Neilsen wrote an article about [[writing styles|]] for MicroContent back in 1998 that still seems surprisingly relevant.
* Smooth Transition Zoom makes it easy to maintain orientation (system variable VTENABLE).\n* Undo/Redo combines multiple pans and zooms (Options dialog box).